Ferro-Titanit® U

Want to keep this datasheet? Save it now in your required format

Description

The binder phase of Ferro-Titanit® U is roughly equivalent to the austenitic CrNiMo steel X 10CrNiMoNb 18 10 (Mat. No. 1.4580). Its high titanium carbide content of 34 % by weight, or 45 % by volume, provides it with outstanding wear resistance. The Cr and Ni contents simultaneously give the material good scaling resistance and high-temperature strength.

This material data has been provided by Deutsche Edelstahlwerke Specialty Steel (DEW).

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

All categories

Properties

General

Property	Value
Density	6.6 g/cm³ Show Supplier Material materials with Density of 6.6 g/cm³
Grain structure	Titanium carbide + austenite

Mechanical

Property	Value
Compressive strength	2200 MPa Show Supplier Material materials with Compressive strength of 2200 MPa
Flexural strength	950 MPa Show Supplier Material materials with Flexural strength of 950 MPa
Hardness, Rockwell C	51 [-] Show Supplier Material materials with Hardness, Rockwell C of 51 [-]

Thermal

Property	Temperature	Value	Comment
Coefficient of thermal expansion	800 °C	1.25e-05 1/K Show Supplier Material materials with Coefficient of thermal expansion of 1.25e-05 1/K	for 20°C to the mentioned temperature
Thermal conductivity		18 W/(m·K) Show Supplier Material materials with Thermal conductivity of 18 W/(m·K)

Electrical

Property	Value
Electrical resistivity	9.6e-07 Ω·m Show Supplier Material materials with Electrical resistivity of 9.6e-07 Ω·m

Magnetic

Property	Value	Comment
Relative magnetic permeability	1 [-] Show Supplier Material materials with Relative magnetic permeability of 1 [-]	max.

Chemical properties

Property	Value	Comment
Chromium	18 % Show Supplier Material materials with Chromium of 18 %
Iron	Balance
Molybdenum	2 % Show Supplier Material materials with Molybdenum of 2 %
Nickel	12 % Show Supplier Material materials with Nickel of 12 %
Other	34 % Show Supplier Material materials with Other of 34 %	TiC

Technological properties

Property

Application areas

Ferro-Titanit ® U is used where non-magnetisable material with a high wear resistance is required. Its excellent corrosion resistance, in particular in media containing chlorine ions, gives it a broad range of applications in the chemical industry.

Corrosion properties

The material is non-magnetisable and, because of its high Cr and Mo contents, possesses excellent resistance to pitting corrosion in media containing chlorine ions.

General machinability

In as-delivered condition, this material can be machined by conventional methods.

Ferro-Titanit® U

Description

Ashby charts

Applications

Materials by this supplier

Use cases

Properties