General
Property | Value |
---|---|
Density | 8 g/cm³ Show Supplier Material materials with Density of 8 g/cm³ |
Dimension
Property | Value | Comment |
---|---|---|
Diameter | 250 mm Show Supplier Material materials with Diameter of 250 mm | max. |
Mechanical
Property | Temperature | Value | Comment |
---|---|---|---|
Charpy impact energy, V-notch | 100 J Show Supplier Material materials with Charpy impact energy, V-notch of 100 J | ||
Elastic modulus | 20 °C | 200 GPa Show Supplier Material materials with Elastic modulus of 200 GPa | |
100 °C | 194 GPa Show Supplier Material materials with Elastic modulus of 194 GPa | ||
200 °C | 186 GPa Show Supplier Material materials with Elastic modulus of 186 GPa | ||
300 °C | 179 GPa Show Supplier Material materials with Elastic modulus of 179 GPa | ||
400 °C | 172 GPa Show Supplier Material materials with Elastic modulus of 172 GPa | ||
500 °C | 165 GPa Show Supplier Material materials with Elastic modulus of 165 GPa | ||
Elongation | 30 % Show Supplier Material materials with Elongation of 30 % | A5 | Transverse | |
40 % Show Supplier Material materials with Elongation of 40 % | A5 | ||
Hardness, Brinell | 215 [-] Show Supplier Material materials with Hardness, Brinell of 215 [-] | ||
Hardness, Rockwell C | 22 [-] Show Supplier Material materials with Hardness, Rockwell C of 22 [-] | ||
Tensile strength | 500 - 700 MPa Show Supplier Material materials with Tensile strength of 500 - 700 MPa | ||
Yield strength | 20 °C | 200 MPa Show Supplier Material materials with Yield strength of 200 MPa | RP02 |
23 °C | 235 MPa Show Supplier Material materials with Yield strength of 235 MPa | RP1 | |
100 °C | 165 MPa Show Supplier Material materials with Yield strength of 165 MPa | RP02 | |
100 °C | 200 MPa Show Supplier Material materials with Yield strength of 200 MPa | RP1 | |
150 °C | 150 MPa Show Supplier Material materials with Yield strength of 150 MPa | RP02 | |
150 °C | 180 MPa Show Supplier Material materials with Yield strength of 180 MPa | RP1 | |
200 °C | 137 MPa Show Supplier Material materials with Yield strength of 137 MPa | RP02 | |
200 °C | 165 MPa Show Supplier Material materials with Yield strength of 165 MPa | RP1 | |
250 °C | 127 MPa Show Supplier Material materials with Yield strength of 127 MPa | RP02 | |
250 °C | 153 MPa Show Supplier Material materials with Yield strength of 153 MPa | RP1 | |
300 °C | 119 MPa Show Supplier Material materials with Yield strength of 119 MPa | RP02 | |
300 °C | 145 MPa Show Supplier Material materials with Yield strength of 145 MPa | RP1 | |
350 °C | 113 MPa Show Supplier Material materials with Yield strength of 113 MPa | RP02 | |
350 °C | 139 MPa Show Supplier Material materials with Yield strength of 139 MPa | RP1 | |
400 °C | 108 MPa Show Supplier Material materials with Yield strength of 108 MPa | RP02 | |
400 °C | 135 MPa Show Supplier Material materials with Yield strength of 135 MPa | RP1 | |
450 °C | 103 MPa Show Supplier Material materials with Yield strength of 103 MPa | RP02 | |
450 °C | 130 MPa Show Supplier Material materials with Yield strength of 130 MPa | RP1 | |
500 °C | 100 MPa Show Supplier Material materials with Yield strength of 100 MPa | RP02 | |
500 °C | 128 MPa Show Supplier Material materials with Yield strength of 128 MPa | RP1 | |
550 °C | 98 MPa Show Supplier Material materials with Yield strength of 98 MPa | RP02 | |
550 °C | 127 MPa Show Supplier Material materials with Yield strength of 127 MPa | RP1 |
Thermal
Property | Temperature | Value | Comment |
---|---|---|---|
Coefficient of thermal expansion | 100 °C | 1.6e-05 1/K Show Supplier Material materials with Coefficient of thermal expansion of 1.6e-05 1/K | for 20°C to the mentioned temperature |
200 °C | 1.65e-05 1/K Show Supplier Material materials with Coefficient of thermal expansion of 1.65e-05 1/K | for 20°C to the mentioned temperature | |
300 °C | 1.7e-05 1/K Show Supplier Material materials with Coefficient of thermal expansion of 1.7e-05 1/K | for 20°C to the mentioned temperature | |
400 °C | 1.75e-05 1/K Show Supplier Material materials with Coefficient of thermal expansion of 1.75e-05 1/K | for 20°C to the mentioned temperature | |
500 °C | 1.8e-05 1/K Show Supplier Material materials with Coefficient of thermal expansion of 1.8e-05 1/K | for 20°C to the mentioned temperature | |
Specific heat capacity | 500 J/(kg·K) Show Supplier Material materials with Specific heat capacity of 500 J/(kg·K) | ||
Thermal conductivity | 15 W/(m·K) Show Supplier Material materials with Thermal conductivity of 15 W/(m·K) |
Electrical
Property | Value |
---|---|
Electrical resistivity | 7.5e-07 Ω·m Show Supplier Material materials with Electrical resistivity of 7.5e-07 Ω·m |
Chemical properties
Property | Value |
---|---|
Carbon | 0.03 % Show Supplier Material materials with Carbon of 0.03 % |
Chromium | 16.5 - 18.5 % Show Supplier Material materials with Chromium of 16.5 - 18.5 % |
Iron | Balance |
Manganese | 2 % Show Supplier Material materials with Manganese of 2 % |
Molybdenum | 2 - 2.5 % Show Supplier Material materials with Molybdenum of 2 - 2.5 % |
Nickel | 10 - 13 % Show Supplier Material materials with Nickel of 10 - 13 % |
Nitrogen | 0.1 % Show Supplier Material materials with Nitrogen of 0.1 % |
Phosphorus | 0.045 % Show Supplier Material materials with Phosphorus of 0.045 % |
Silicon | 1 % Show Supplier Material materials with Silicon of 1 % |
Sulfur | 0.03 % Show Supplier Material materials with Sulfur of 0.03 % |
Technological properties
Property | ||
---|---|---|
Application areas | Chemical Industry, Pharmaceutical Industry, Food Industry, Fittings, Construction, Ship Building & Marine Structures, Petrochemistry, Automotive, Decorative Applications, Kitchen Equipment, Electronics, Aerospace, Maritime | |
Cold Forming | It is suitable for cold forming according to DIN EN 10263-5. | |
Corrosion properties | Due to the molybdenum content has a higher corrosion resistance thatn Acidur 4301 and 4307 (specially in chloride mediums). Due to its low carbon content it is resistant against intergranular corrosion according to DIN EN 3651 part 2. PREN= 23.1-28.8 | |
Heat Treatment | Solution annealing: 1020-1120°C (water, air) fast cooling | |
Hot forming | It is formable at 900-1200°C | |
Processing history | Solution Annealed | |
Welding | It is weldable with or without filler material (e.g. 1.4430). The interpass temperature should not exceed 200°C. Subsequent heat treatment is not require. The resistance to intergranular corrosion is not affected by welding according to DIN EN 3651 part 2. |