Cycolac™ MG47F resin

Want to keep this datasheet? Save it now in your required format

Description

Cycolac™ is a range of thermoplastic resin products, developed by Sabic, which is made of acrylonitrile-butadiene-styrene (ABS). It has excellent colourability and can be found in a wide range of colours, offering outstanding aesthetics. They have highly tailorable engineering properties and outstanding flow, toughness, dimensional stability, scratch resistance, and high-temperature resistance.
Cycolac™ MG47F resin is a multi-purpose ABS for injection moulding. It is FDA approved. As a multi-purpose material, it provides a favourable balance of engineering properties. Its key features include:

Excellent aesthetics
High toughness
Good dimensional stability
High scratch resistance
High temperature resistance
Excellent colourability
Good fatigue and chemical resistance

This material data has been provided by Matmatch.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Properties

General

Property	Temperature	Value	Comment
Density	23.0 °C	1.04 g/cm³ Show Material materials with Density of 1.04 g/cm³	ASTM D792

Mechanical

Property	Temperature	Value	Comment
Elastic modulus	23.0 °C	2.27 GPa Show Material materials with Elastic modulus of 2.27 GPa	ASTM D790
Elongation	23.0 °C	24 % Show Material materials with Elongation of 24 %	ASTM D638
Elongation at yield	23.0 °C	2 % Show Material materials with Elongation at yield of 2 %	ASTM D638
Flexural modulus	23.0 °C	2.3 GPa Show Material materials with Flexural modulus of 2.3 GPa	ASTM D790
Flexural yield strength	23.0 °C	70 MPa Show Material materials with Flexural yield strength of 70 MPa	ASTM D790
Impact strength, Charpy notched	-30.0 °C	9 kJ/m² Show Material materials with Impact strength, Charpy notched of 9 kJ/m²	ISO 179/1eA
	23.0 °C	26 kJ/m² Show Material materials with Impact strength, Charpy notched of 26 kJ/m²	ISO 179/1eA

Impact strength, Izod notched	-30.0 °C	8 kJ/m² Show Material materials with Impact strength, Izod notched of 8 kJ/m²	ISO 180/1A
	23.0 °C	22 kJ/m² Show Material materials with Impact strength, Izod notched of 22 kJ/m²	ISO 180/1A
	Unlock all property charts
Impact strength, Izod notched, ASTM	23.0 °C	320 J/m Show Material materials with Impact strength, Izod notched, ASTM of 320 J/m	ASTM D256
Tensile strength	23.0 °C	33 MPa Show Material materials with Tensile strength of 33 MPa	ASTM D638
Yield strength	23.0 °C	44 MPa Show Material materials with Yield strength of 44 MPa	ASTM D638

Thermal

Property	Temperature	Value	Comment
Coefficient of thermal expansion	23.0 °C	8.82E-5 1/K Show Material materials with Coefficient of thermal expansion of 8.82E-5 1/K	ASTM E831, for -40 to 40°C
Coefficient of thermal expansion, transverse	23.0 °C	8.82E-5 1/K Show Material materials with Coefficient of thermal expansion, transverse of 8.82E-5 1/K	ASTM E831, for -40 to 40°C
Heat deflection temperature, 0.45 MPa		94 °C Show Material materials with Heat deflection temperature, 0.45 MPa of 94 °C	ASTM D648
Heat deflection temperature, 1.80 MPa		80 °C Show Material materials with Heat deflection temperature, 1.80 MPa of 80 °C	ASTM D648
Melting point		220 - 260 °C Show Material materials with Melting point of 220 - 260 °C
Relative temperature index, electrical		60 °C Show Material materials with Relative temperature index, electrical of 60 °C	UL 746
Relative temperature index, mechanical strength		60 °C Show Material materials with Relative temperature index, mechanical strength of 60 °C	UL 746
Vicat softening temperature		98 °C Show Material materials with Vicat softening temperature of 98 °C	ISO 906, Rate B/50
Flammability	UL Recognized, 94HB Flame Class Rating (3) 1.5 mm UL 94

Rheological Properties

Property	Value	Comment
Melt mass-flow rate	5.6 g/10min Show Material materials with Melt mass-flow rate of 5.6 g/10min	ASTM D1238 230°C/3.8 kgf
Melt volume-flow rate	18 cm³/10min Show Material materials with Melt volume-flow rate of 18 cm³/10min	ISO 1133, 220°C/10.0 kg

Technological properties

Property
Application areas	Additive manufacturing, Appliances, Automotive exterior parts, Construction applications, Electronic displays, Fluid handling, Lawn and garden equipment, Lenses, Lighting applications, medical/healthcare, Non-specific food, Outdoor applications, packaging
Color	Black, White, Natural (unpigmented)
Processing methods	Injection Molding: Drying Temperature: 80-95°C, Drying Time: 2-4 hr, Rear Temperature: 190-210°C, Middle Temperature: 205-225°C, Front Temperature: 215-240°C, Nozzle Temperature: 220-260°C, Melt Temperature: 220-260°C, Mold Temperature: 50-70°C, Back Pressure: 0.3-0.7 MPa, Screw Speed 30-60 rpm

Cycolac™ MG47F resin

Description

Ashby charts

Suggested reading

Properties