Want to keep this datasheet? Save it now in your required format


SABIC® LLDPE 118P is a butene linear low density polyethylene resin typically used for food applications. It contains an antioxidant inspired by nature offering advantages versus conventional stabilizers: - Produced with no phosphorus or sulphur based additives - Improved processing stability at a much reduced concentration - No Specific Migration Limit (SML free) Films produced from this resin typically have good puncture resistance, high tensile strength, good hot tack properties and low gel levels. Typical applications for SABIC® LLDPE 118P are (frozen) food bags and lamination films. Film properties. Film of 50 μm and BUR=2 has been produced on Kiefel IBC with 140 kg/h. Die size 200 mm, die gap 2,7 mm. This product is not intended for and must not be used in any pharmaceutical/medical applications.

This material data has been provided by Matmatch.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts




Coefficient of friction

1.2 [-]

Show Material materials with Coefficient of friction of 1.2 [-]

ASTM D1894


23.0 °C

0.92 g/cm³

Show Material materials with Density of 0.92 g/cm³

ASTM D1505



Tear strength

23.0 °C

40 kN/m

Show Material materials with Tear strength of 40 kN/m

ISO 6383-2

Tear strength, transverse

23.0 °C

140 kN/m

Show Material materials with Tear strength, transverse of 140 kN/m

ISO 6383-2




13 %

Show Material materials with Haze of 13 %

ASTM D1003

Technological properties

Application areas

It is used in food applications (frozen food bags and lamination films).