LEXAN™ Resin 123SRM

Want to keep this datasheet? Save it now in your required format

Description

Easy flow, uv stabilised, impact modified, super release grade polycarbonate.

This material data has been provided by Matmatch.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

Properties

General

PropertyTemperatureValueComment

Density

23.0 °C

1.2 g/cm³

Show Material materials with Density of 1.2 g/cm³

ASTM D 792

Water absorption

23.0 °C

0.15 %

Show Material materials with Water absorption of 0.15 %

ASTM D 570 | 24 Hours

Mechanical

PropertyTemperatureValueComment

Elongation

23.0 °C

143 %

Show Material materials with Elongation of 143 %

ASTM D 638 | Type I, 50 mm/min

Flexural modulus

23.0 °C

2.3 GPa

Show Material materials with Flexural modulus of 2.3 GPa

ASTM D 790 | 1.3 mm/min, 50 mm span

Flexural yield strength

23.0 °C

97 MPa

Show Material materials with Flexural yield strength of 97 MPa

ASTM D 790 | 1.3 mm/min, 50 mm span

Impact strength, Izod notched, ASTM

23.0 °C

801 J/m

Show Material materials with Impact strength, Izod notched, ASTM of 801 J/m

ASTM D 256

Yield strength

23.0 °C

65 MPa

Show Material materials with Yield strength of 65 MPa

ASTM D 638 | Type I, 50 mm/min

Thermal

PropertyValueComment

Heat deflection temperature, 1.80 MPa

133 °C

Show Material materials with Heat deflection temperature, 1.80 MPa of 133 °C

ASTM D 648 | 1.82 MPa, 6.4 mm, unannealed

Rheological Properties

PropertyTemperatureValueComment

Melt mass-flow rate

18 g/10min

Show Material materials with Melt mass-flow rate of 18 g/10min

ASTM D 1238 | 300°C/1.2 kg

Shrinkage

23.0 °C

0.5 - 0.7 %

Show Material materials with Shrinkage of 0.5 - 0.7 %

SABIC method | 3.2 mm

Technological properties

Property
Application areas

Circuit Protection,Data Transfer,Displays,Electronic Components,Enclosures,Energy Management,LED Lighting,Medical Device,Medical Facility Infrastructure,Non-LED Lighting,Surgical Devices,Wiring Devices

Processing methods

Drying Temperature: 120°C, Drying Time: 3-4hrs, Drying Time (Cumulative): 48hrs, Melt Temperature: 280-305°C, Mold Temperature: 70-95°C