SABIC® LDPE 2102X0

Want to keep this datasheet? Save it now in your required format

Description

SABIC® LDPE 2102X0 is a grade typically used in foam applications. Application SABIC® LDPE 2102X0 can be typically used for all types of foam, produced with chemical blowing agents or physical gases, X-linked and non X-linked. This product is not intended for and must not be used in any pharmaceutical/medical applications.

This material data has been provided by Matmatch.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Properties

General

Property	Temperature	Value	Comment
Density	23.0 °C	0.92 g/cm³ Show Material materials with Density of 0.92 g/cm³	ASTM D1505

Mechanical

Property	Temperature	Value	Comment
Elastic modulus	23.0 °C	0.25 GPa Show Material materials with Elastic modulus of 0.25 GPa	SABIC method
Hardness, Shore D	23.0 °C	46 [-] Show Material materials with Hardness, Shore D of 46 [-]	ISO 868

Electrical

Property	Temperature	Value	Comment
Dielectric constant	23.0 °C	2.2 [-] Show Material materials with Dielectric constant of 2.2 [-]	ASTM D150 \| at 60 Hz
Dissipation factor	23.0 °C	5E-4 [-] Show Material materials with Dissipation factor of 5E-4 [-]	ASTM D150 \| at 60 Hz
Electrical resistivity	23.0 °C	8.50E+13 Ω·m Show Material materials with Electrical resistivity of 8.50E+13 Ω·m	ASTM D257

Technological properties

Property
Application areas	It is used for all types of foam, produced with chemical blowing agents or physical gases, X-linked and non X-linked.

SABIC® LDPE 2102X0

Description

Ashby charts

Suggested reading

Properties