Want to keep this datasheet? Save it now in your required format


SABIC® LDPE 2200H2 is a grade with a low melt flow rate and contains a low level of anti block and a medium level of slip agent. This grade shows a good draw down ability and good optical properties. Application SABIC® LDPE 2200H2 is typically used for thin film applications requiring high strength and thin shrink film with high shrink forces and wrapping strength. Typical applications are lamination and coextruded films. Film properties Film properties have been measured at film of 50 μm with a BUR of 3. The film has been produced on Kiefel IBC blown film line with 200 kg/h. Die size 200 mm, die gap 0.8 mm. This product is not intended for and must not be used in any pharmaceutical/medical applications.

This material data has been provided by Matmatch.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts




Coefficient of friction

0.2 [-]

Show Material materials with Coefficient of friction of 0.2 [-]

ASTM D1894


23.0 °C

0.92 g/cm³

Show Material materials with Density of 0.92 g/cm³

ASTM D1505



Tear strength

23.0 °C

35 kN/m

Show Material materials with Tear strength of 35 kN/m

ISO 6383-2

Tear strength, transverse

23.0 °C

40 kN/m

Show Material materials with Tear strength, transverse of 40 kN/m

ISO 6383-2




9 %

Show Material materials with Haze of 9 %

ASTM D1003

Technological properties

Application areas

Lamination and coextruded films