Want to keep this datasheet? Save it now in your required format


SABIC® LDPE 2402H3W is a high gloss, general purpose grade with a high level of anti block and slip agent. This grade offers good optical properties and a very good draw down ability. Application SABIC® LDPE 2402H3W is typically used for thin high gloss films used for automatic packaging purposes. Due to very low migration levels, SABIC® LDPE 2402H3W can also be used for food applications. Film properties Film properties have been measured at film of 25 μm with a BUR of 3. The film has been produced on Kiefel IBC blown film line with 200 kg/h. Die size 200 mm, die gap 0.8 mm. This product is not intended for and must not be used in any pharmaceutical/medical applications.

This material data has been provided by Matmatch.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts




Coefficient of friction

0.2 [-]

Show Material materials with Coefficient of friction of 0.2 [-]

ASTM D1894


23.0 °C

0.92 g/cm³

Show Material materials with Density of 0.92 g/cm³

ASTM D1505



Tear strength

23.0 °C

70 kN/m

Show Material materials with Tear strength of 70 kN/m

ISO 6383-2

Tear strength, transverse

23.0 °C

35 kN/m

Show Material materials with Tear strength, transverse of 35 kN/m

ISO 6383-2




8 %

Show Material materials with Haze of 8 %

ASTM D1003

Technological properties

Application areas

Thin high gloss films used for automatic packaging purposes