SABIC® POM 30RE

Want to keep this datasheet? Save it now in your required format

Description

SABIC® POM 30RE is a special grade for Rods and Extrusion sheet applications free of center porosity in large diameter and thickness.

This material data has been provided by Matmatch.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Properties

General

Property	Temperature	Value	Comment
Density	23.0 °C	1.41 g/cm³ Show Material materials with Density of 1.41 g/cm³	ISO 1183

Mechanical

Property	Temperature	Value	Comment
Elastic modulus	23.0 °C	2.4 GPa Show Material materials with Elastic modulus of 2.4 GPa	ISO 527-2 1A \| 1mm/min
Elongation at yield	23.0 °C	11 % Show Material materials with Elongation at yield of 11 %	ISO 527-2 1A \| 50mm/min
Flexural modulus	23.0 °C	2.5 GPa Show Material materials with Flexural modulus of 2.5 GPa	ISO 178
Impact strength, Charpy notched	23.0 °C	8.5 kJ/m² Show Material materials with Impact strength, Charpy notched of 8.5 kJ/m²	ISO 179/1eA
Yield strength	23.0 °C	61 MPa Show Material materials with Yield strength of 61 MPa	ISO 527-2 1A \| 50 mm/min

Thermal

Property	Value	Comment
Heat deflection temperature, 1.80 MPa	91 °C Show Material materials with Heat deflection temperature, 1.80 MPa of 91 °C	ISO 75-1&2 \| 1.8 MPa
Melting point	163 °C Show Material materials with Melting point of 163 °C	ISO 11357-1/-3

Rheological Properties

Property	Value	Comment
Melt volume-flow rate	2.5 cm³/10min Show Material materials with Melt volume-flow rate of 2.5 cm³/10min	ISO 1133

Technological properties

Property
Application areas	Automotive

SABIC® POM 30RE

Description

Ashby charts

Suggested reading

Properties