General
Property | Temperature | Value | Comment |
---|---|---|---|
Density | 23.0 °C | 1.35 g/cm³ Show Material materials with Density of 1.35 g/cm³ | ISO 1183 |
Water absorption | 23.0 °C | 0.12 % Show Material materials with Water absorption of 0.12 % | ISO 62 | 23°C, 50% RH |
Mechanical
Property | Temperature | Value | Comment |
---|---|---|---|
Elastic modulus | 23.0 °C | 6 GPa Show Material materials with Elastic modulus of 6 GPa | ISO 527 | 1 mm/min |
Elongation | 23.0 °C | 2 % Show Material materials with Elongation of 2 % | ISO 527 | 5 mm/min |
Flexural modulus | 23.0 °C | 5.5 GPa Show Material materials with Flexural modulus of 5.5 GPa | ISO 178 | 2 mm/min |
Flexural strength | 23.0 °C | 120 MPa Show Material materials with Flexural strength of 120 MPa | ISO 178 |
Hardness, Ball Indentation | 23.0 °C | 125 MPa Show Material materials with Hardness, Ball Indentation of 125 MPa | ISO 2039-1 |
Impact strength, Charpy notched | 23.0 °C | 9 kJ/m² Show Material materials with Impact strength, Charpy notched of 9 kJ/m² | ISO 179/2C |
Impact strength, Charpy unnotched | -30.0 °C | 40 kJ/m² Show Material materials with Impact strength, Charpy unnotched of 40 kJ/m² | ISO 179/1eU |
23.0 °C | 40 kJ/m² Show Material materials with Impact strength, Charpy unnotched of 40 kJ/m² | ISO 179/1eU | |
Impact strength, Izod notched | -30.0 °C | 6 kJ/m² Show Material materials with Impact strength, Izod notched of 6 kJ/m² | ISO 180/1A |
23.0 °C | 7 kJ/m² Show Material materials with Impact strength, Izod notched of 7 kJ/m² | ISO 180/1A | |
Impact strength, Izod unnotched | -30.0 °C | 35 kJ/m² Show Material materials with Impact strength, Izod unnotched of 35 kJ/m² | ISO 180/1U |
23.0 °C | 35 kJ/m² Show Material materials with Impact strength, Izod unnotched of 35 kJ/m² | ISO 180/1U | |
Tensile strength | 23.0 °C | 90 MPa Show Material materials with Tensile strength of 90 MPa | ISO 527 | 5 mm/min |
Thermal
Property | Temperature | Value | Comment | ||
---|---|---|---|---|---|
Coefficient of thermal expansion | 23.0 °C | 3E-5 1/K Show Material materials with Coefficient of thermal expansion of 3E-5 1/K | ISO 11359-2 | -23°C to 80°C | ||
Heat deflection temperature, 1.80 MPa | 139 °C Show Material materials with Heat deflection temperature, 1.80 MPa of 139 °C | ISO 75/Ae | 1.8 MPa | |||
Relative temperature index, electrical | 130 °C Show Material materials with Relative temperature index, electrical of 130 °C | UL 746B | |||
Relative temperature index, mechanical impact | 125 °C Show Material materials with Relative temperature index, mechanical impact of 125 °C | UL 746B | |||
Relative temperature index, mechanical strength | 130 °C Show Material materials with Relative temperature index, mechanical strength of 130 °C | UL 746B | |||
Thermal conductivity | 23.0 °C | 0.22 W/(m·K) Show Material materials with Thermal conductivity of 0.22 W/(m·K) | ISO 8302 | ||
Vicat softening temperature | 145 °C Show Material materials with Vicat softening temperature of 145 °C | ISO 306 | Rate B/120 | |||
Flammability | UL Recognized, 94V-0 Flame Class Rating | 1.5mm | UL 94 |
Electrical
Property | Temperature | Value | Comment |
---|---|---|---|
Comparative tracking index | 23.0 °C | 150 V Show Material materials with Comparative tracking index of 150 V | IEC 60112 |
Dielectric constant | 23.0 °C | 3 [-] Show Material materials with Dielectric constant of 3 [-] | IEC 60250 | at 50/60 Hz |
Dielectric strength | 23.0 °C | 16 kV/mm Show Material materials with Dielectric strength of 16 kV/mm | IEC 60243-1 | in oil, 3.2 mm |
Dissipation factor | 23.0 °C | 0.01 [-] Show Material materials with Dissipation factor of 0.01 [-] | IEC 60250 | at 1 MHz |
Rheological Properties
Property | Temperature | Value | Comment |
---|---|---|---|
Melt volume-flow rate | 6 cm³/10min Show Material materials with Melt volume-flow rate of 6 cm³/10min | ISO 1133 | 300°C/1.2 kg | |
Shrinkage | 23.0 °C | 0.2 - 0.5 % Show Material materials with Shrinkage of 0.2 - 0.5 % | SABIC method |
Technological properties
Property | ||
---|---|---|
Application areas | Aerospace,Air Cabin Interiors,Amusement Machine,ATM/Ticket Machine,Audio,Auto Aftermarket,Building Accessory,Building Element,Circuit Protection,Coffee Maker/Espresso Machine,Data Management,Data Transfer,Displays,Document Handling,Door Handle,Electronic Components,Enclosure/Housing/Cover,Enclosures,Energy Management,Exercise Equipment,Fixture Bath/Shower,Food Processor,Heavy Vehicles,Lab Ware and Clinical Diagnostics,Lawn/Garden,LED Lighting,Medical Device,Medical Facility Infrastructure,Meter Water,Monitoring and Imaging,Motorcycle,Non-LED Lighting,Personal Computing,Pharmaceutical Packaging & Drug Delivery,Photo/Video Camera,Photovoltaic Components,Power Boat,Power Manangement,Pump,Rail Cabin Interiors,Respiratory,Scooter/Moped,Security/Detection,Semiconductor,Small Appliance,Storage/Table,Surgical Devices,Swimming Pool/Spa,Thermoplastic,Traffic Management,Trim,Vacuum Cleaner,Vending Machine,Washing Machine,Watch/Jewelry,Water Treatment/Filtration,Weaving Machine,Wireless Communications,Wiring Devices,Irrigation | |
Fillers | 20% Glass Fiber | |
Processing methods | Drying Temperature: 120°C, Drying Time: 2-4hrs, Maximum Moisture Content: 0.02%, Melt Temperature: 290-320°C, Nozzle Temperature: 280-310°C, Front - Zone 3 Temperature: 290-320°C, Middle - Zone 2 Temperature: 280-310°C, Rear - Zone 1 Temperature: 270-300°C, Hopper Temperature: 60-80°C, Mold Temperature: 80-120°C |