SABIC® POM 460S

Want to keep this datasheet? Save it now in your required format

Description

SABIC® POM 460S is an extremely easy flowing grade suitable for injection molding applications for very thin-walled precision molded parts with critical flow-path-wall thickness relation; the grade permits processing at reduced temperature, shorter cycle times suitable for many parts.

This material data has been provided by Matmatch.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Properties

General

Property	Temperature	Value	Comment
Density	23.0 °C	1.41 g/cm³ Show Material materials with Density of 1.41 g/cm³	ISO 1183
Water absorption	23.0 °C	0.65 % Show Material materials with Water absorption of 0.65 %	ISO 62

Mechanical

Property	Temperature	Value	Comment
Elastic modulus	23.0 °C	3 GPa Show Material materials with Elastic modulus of 3 GPa	ISO 527-2 1A \| 1mm/min
Elongation at yield	23.0 °C	7 % Show Material materials with Elongation at yield of 7 %	ISO 527-2 1A \| 50mm/min
Flexural modulus	23.0 °C	2.8 GPa Show Material materials with Flexural modulus of 2.8 GPa	ISO 178
Impact strength, Charpy notched	-30.0 °C	100 kJ/m² Show Material materials with Impact strength, Charpy notched of 100 kJ/m²	ISO 179/1eU
	23.0 °C	100 kJ/m² Show Material materials with Impact strength, Charpy notched of 100 kJ/m²	ISO 179/1eU

Yield strength	23.0 °C	65 MPa Show Material materials with Yield strength of 65 MPa	ISO 527-2 1A \| 50 mm/min

Thermal

Property	Temperature	Value	Comment
Coefficient of thermal expansion	23.0 °C	1.1E-4 1/K Show Material materials with Coefficient of thermal expansion of 1.1E-4 1/K	ISO 11359-2
Heat deflection temperature, 1.80 MPa		106 °C Show Material materials with Heat deflection temperature, 1.80 MPa of 106 °C	ISO 75-1&2 \| 1.8 MPa
Melting point		166 °C Show Material materials with Melting point of 166 °C	ISO 11357-1/-3

Rheological Properties

Property	Temperature	Value	Comment
Melt volume-flow rate		39 cm³/10min Show Material materials with Melt volume-flow rate of 39 cm³/10min	ISO 1133
Shrinkage	23.0 °C	1.9 % Show Material materials with Shrinkage of 1.9 %	ISO 294-4
Shrinkage, transverse	23.0 °C	1.8 % Show Material materials with Shrinkage, transverse of 1.8 %	ISO 294-4

Technological properties

Property
Application areas	Automotive

SABIC® POM 460S

Description

Ashby charts

Suggested reading

Properties