General
Property | Temperature | Value | Comment |
---|---|---|---|
Density | 23.0 °C | 1.25 g/cm³ Show Material materials with Density of 1.25 g/cm³ | ISO 1183 |
Water absorption | 23.0 °C | 0.13 % Show Material materials with Water absorption of 0.13 % | ISO 62 | 23°C, 50% RH |
Mechanical
Property | Temperature | Value | Comment | ||
---|---|---|---|---|---|
Elastic modulus | 23.0 °C | 3.3 GPa Show Material materials with Elastic modulus of 3.3 GPa | ISO 527 | 1 mm/min | ||
Elongation | 23.0 °C | 7 % Show Material materials with Elongation of 7 % | ISO 527 | 5 mm/min | ||
Elongation at yield | 23.0 °C | 5 % Show Material materials with Elongation at yield of 5 % | ISO 527 | 5 mm/min | ||
Flexural modulus | 23.0 °C | 3.4 GPa Show Material materials with Flexural modulus of 3.4 GPa | ISO 178 | 2 mm/min | ||
Flexural yield strength | 23.0 °C | 95 MPa Show Material materials with Flexural yield strength of 95 MPa | ISO 178 | 2 mm/min | ||
Hardness, Ball Indentation | 23.0 °C | 115 MPa Show Material materials with Hardness, Ball Indentation of 115 MPa | ISO 2039-1 | ||
Impact strength, Charpy notched | 23.0 °C | 15 kJ/m² Show Material materials with Impact strength, Charpy notched of 15 kJ/m² | ISO 179/2C | ||
Impact strength, Izod notched | -30.0 °C | 8 kJ/m² Show Material materials with Impact strength, Izod notched of 8 kJ/m² | ISO 180/1A | ||
23.0 °C | 10 kJ/m² Show Material materials with Impact strength, Izod notched of 10 kJ/m² | ISO 180/1A | |||
Impact strength, Izod unnotched | -30.0 °C | 130 kJ/m² Show Material materials with Impact strength, Izod unnotched of 130 kJ/m² | ISO 180/1U | ||
Tensile strength | 23.0 °C | 45 MPa Show Material materials with Tensile strength of 45 MPa | ISO 527 | 5 mm/min | ||
Yield strength | 23.0 °C | 60 MPa Show Material materials with Yield strength of 60 MPa | ISO 527 | 5 mm/min | ||
Impact strength, Charpy unnotched | No Break @ 23,-30°C | ISO 179/1eU |
Thermal
Property | Temperature | Value | Comment | ||
---|---|---|---|---|---|
Coefficient of thermal expansion | 23.0 °C | 4E-5 1/K Show Material materials with Coefficient of thermal expansion of 4E-5 1/K | ISO 11359-2 | -23°C to 80°C | ||
Heat deflection temperature, 1.80 MPa | 136 °C Show Material materials with Heat deflection temperature, 1.80 MPa of 136 °C | ISO 75/Ae | 1.8 MPa | |||
Relative temperature index, electrical | 130 °C Show Material materials with Relative temperature index, electrical of 130 °C | UL 746B | |||
Relative temperature index, mechanical impact | 125 °C Show Material materials with Relative temperature index, mechanical impact of 125 °C | UL 746B | |||
Relative temperature index, mechanical strength | 125 °C Show Material materials with Relative temperature index, mechanical strength of 125 °C | UL 746B | |||
Thermal conductivity | 23.0 °C | 0.21 W/(m·K) Show Material materials with Thermal conductivity of 0.21 W/(m·K) | ISO 8302 | ||
Vicat softening temperature | 143 °C Show Material materials with Vicat softening temperature of 143 °C | ISO 306 | Rate B/120 | |||
Flammability | UL Recognized, 94-5VA Flame Class Rating | 3mm | UL 94 |
Electrical
Property | Temperature | Value | Comment |
---|---|---|---|
Comparative tracking index | 23.0 °C | 175 V Show Material materials with Comparative tracking index of 175 V | IEC 60112 |
Dielectric constant | 23.0 °C | 2.9 [-] Show Material materials with Dielectric constant of 2.9 [-] | IEC 60250 | at 50/60 Hz |
Dielectric strength | 23.0 °C | 16 kV/mm Show Material materials with Dielectric strength of 16 kV/mm | IEC 60243-1 | in oil, 3.2 mm |
Dissipation factor | 23.0 °C | 0.01 [-] Show Material materials with Dissipation factor of 0.01 [-] | IEC 60250 | at 1 MHz |
Rheological Properties
Property | Temperature | Value | Comment |
---|---|---|---|
Melt volume-flow rate | 8 cm³/10min Show Material materials with Melt volume-flow rate of 8 cm³/10min | ISO 1133 | 300°C/1.2 kg | |
Shrinkage | 23.0 °C | 0.2 - 0.6 % Show Material materials with Shrinkage of 0.2 - 0.6 % | SABIC method |
Technological properties
Property | ||
---|---|---|
Application areas | Air Cabin Interiors,Air Conditioning,Air Filtration,ATM/Ticket Machine,Audio,Auto Aftermarket,Building Accessory,Circuit Protection,Coffee Maker/Espresso Machine,Data Management,Data Transfer,Defense Vehicles,Dishwasher,Displays,Document Handling,Electronic Components,Enclosure/Housing/Cover,Enclosures,Energy Management,EV Infrastructure,Exterior Mirror,Fixture Bath/Shower,Gas/Electric Oven,Heavy Vehicles,HVAC Underhood,Hygiene/Personal Care,Individual Equiptment,Lab Ware and Clinical Diagnostics,LED Lighting,Medical Device,Meter Gas,Meter Water,Monitoring and Imaging,Non-LED Lighting,Personal Computing,Photo/Video Camera,Photovoltaic Components,Power Manangement,Pump,Refrigerator,Respiratory,Security/Detection,Semiconductor,Small Appliance,Swimming Pool/Spa,Vacuum Cleaner,Vending Machine,Washing Machine,Watch/Jewelry,Water Treatment/Filtration,Wearables,Window,Wireless Communications,Wiring Devices,Wire & cable | |
Fillers | 10% Glass Fiber | |
Processing methods | Drying Temperature: 120°C, Drying Time: 2-4hrs, Maximum Moisture Content: 0.02%, Melt Temperature: 290-320°C, Nozzle Temperature: 280-310°C, Front - Zone 3 Temperature: 290-320°C, Middle - Zone 2 Temperature: 280-310°C, Rear - Zone 1 Temperature: 270-300°C, Hopper Temperature: 60-80°C, Mold Temperature: 80-120°C |