SABIC® PP 513MK46

Want to keep this datasheet? Save it now in your required format

Description

SABIC® PP 513MK46 is specially developed for producing injection molded articles. This grade contains nucleating & antistatic agents. It has very high flow properties in combination with excellent impact / stiffness balance and excellent organoleptic properties. SABIC® PP 513MK46 encompasses the following features: High top load strength & down gauging potential Very good Impact resistance Excellent isotropy shrinkage performance (dimensional stability) High crystallization temperature and superior flow behavior (lower cycle time) Easy mold filing for aesthetic & large items Clean product in combination of low / no odor & taste

This material data has been provided by Matmatch.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

All categories

Properties

General

Property	Temperature	Value	Comment
Density	23.0 °C	0.9 g/cm³ Show Material materials with Density of 0.9 g/cm³	ASTM D1505

Mechanical

Property	Temperature	Value	Comment
Elongation at yield	23.0 °C	4.5 % Show Material materials with Elongation at yield of 4.5 %	ISO 527-1/-2
Flexural modulus	23.0 °C	1.35 GPa Show Material materials with Flexural modulus of 1.35 GPa	ASTM D790 A
Hardness, Rockwell L	23.0 °C	98 [-] Show Material materials with Hardness, Rockwell L of 98 [-]	ASTM D785
Impact strength, Izod notched, ASTM	-20.0 °C	32 J/m Show Material materials with Impact strength, Izod notched, ASTM of 32 J/m	ASTM D256
	23.0 °C	53 J/m Show Material materials with Impact strength, Izod notched, ASTM of 53 J/m	ASTM D256

Yield strength	23.0 °C	26 MPa Show Material materials with Yield strength of 26 MPa	ASTM D638

Thermal

Property	Value	Comment
Heat deflection temperature, 0.45 MPa	111 °C Show Material materials with Heat deflection temperature, 0.45 MPa of 111 °C	ASTM D648
Vicat softening temperature	149 °C Show Material materials with Vicat softening temperature of 149 °C	ASTM D1525

Technological properties

Property
Application areas	Thin wall packaging

SABIC® PP 513MK46

Description

Ashby charts

Suggested reading

Properties