SABIC® PP 5211P

Want to keep this datasheet? Save it now in your required format

Description

SABIC® PP 5211P is a non-formulated grade, specially developed for bi-axially oriented PP (BOPP) film extrusion with a very specific molecular structure providing ultimate properties required for the stenter film process. Films produced using PP 5211P will exhibit: -Easy process ability, Good thickness control -Superior optical properties -High tensile properties -Low residual ash -Film produced can be metalized

This material data has been provided by Matmatch.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

All categories

Properties

General

Property	Temperature	Value	Comment
Density	23.0 °C	0.91 g/cm³ Show Material materials with Density of 0.91 g/cm³	ASTM D1505

Mechanical

Property	Temperature	Value	Comment
Elongation at yield	23.0 °C	10 % Show Material materials with Elongation at yield of 10 %	ISO 527-1/-2
Flexural modulus	23.0 °C	1.45 GPa Show Material materials with Flexural modulus of 1.45 GPa	ASTM D790 A
Hardness, Rockwell L	23.0 °C	102 [-] Show Material materials with Hardness, Rockwell L of 102 [-]	ASTM D785
Impact strength, Izod notched, ASTM	23.0 °C	35 J/m Show Material materials with Impact strength, Izod notched, ASTM of 35 J/m	ASTM D256
Yield strength	23.0 °C	33 MPa Show Material materials with Yield strength of 33 MPa	ASTM D638

Thermal

Property	Value	Comment
Heat deflection temperature, 0.45 MPa	96 °C Show Material materials with Heat deflection temperature, 0.45 MPa of 96 °C	ASTM D648
Vicat softening temperature	154 °C Show Material materials with Vicat softening temperature of 154 °C	ASTM D1525

Technological properties

Property
Application areas	Food Container,BOPP film

SABIC® PP 5211P

Description

Ashby charts

Suggested reading

Properties