General
Property | Temperature | Value | Comment |
---|---|---|---|
Density | 23.0 °C | 1.27 g/cm³ Show Material materials with Density of 1.27 g/cm³ | ASTM D 792 |
Mechanical
Property | Temperature | Value | Comment |
---|---|---|---|
Elastic modulus | 23.0 °C | 2.45 GPa Show Material materials with Elastic modulus of 2.45 GPa | ISO 527 | 1 mm/min |
Elongation | 23.0 °C | 10.8 % Show Material materials with Elongation of 10.8 % | ISO 527 | 50 mm/min |
Elongation at yield | 23.0 °C | 3 % Show Material materials with Elongation at yield of 3 % | ISO 527 | 50 mm/min |
Flexural modulus | 23.0 °C | 3.27 GPa Show Material materials with Flexural modulus of 3.27 GPa | ISO 178 | 2 mm/min, 64mm |
Impact strength, Charpy notched | -30.0 °C | 2 kJ/m² Show Material materials with Impact strength, Charpy notched of 2 kJ/m² | ISO 179/1eA |
23.0 °C | 8 kJ/m² Show Material materials with Impact strength, Charpy notched of 8 kJ/m² | ISO 179/1eA | |
Impact strength, Izod notched | -30.0 °C | 2 kJ/m² Show Material materials with Impact strength, Izod notched of 2 kJ/m² | ISO 180/1A |
23.0 °C | 7 kJ/m² Show Material materials with Impact strength, Izod notched of 7 kJ/m² | ISO 180/1A | |
Tensile strength | 23.0 °C | 14 MPa Show Material materials with Tensile strength of 14 MPa | ISO 527 | 50 mm/min, 1A |
Yield strength | 23.0 °C | 20 MPa Show Material materials with Yield strength of 20 MPa | ISO 527 | 50 mm/min |
Thermal
Rheological Properties
Property | Value | Comment |
---|---|---|
Melt mass-flow rate | 3 g/10min Show Material materials with Melt mass-flow rate of 3 g/10min | ISO 1133 | 230°C/2.16 kg |
Technological properties
Property | ||
---|---|---|
Application areas | Under the hood | |
Fillers | Talc | |
Processing methods | Drying Temperature: 80-100°C, Drying Time: 2-4hrs, Melt Temperature: 210-270°C, Nozzle Temperature: 210-270°C, Front - Zone 3 Temperature: 210-270°C, Middle - Zone 2 Temperature: 200-250°C, Rear - Zone 1 Temperature: 190-230°C, Mold Temperature: 15-60°C, Back Pressure: 1-1.5MPa |