SABIC® PP 5770N

Want to keep this datasheet? Save it now in your required format

Description

SABIC® PP 5770N is a PP homopolymer grade with antistatic and nucleating agents. It is suitable for producing injection molded applications with outstanding flow properties, good dimensional stability, high stiffness, excellent organoleptic properties and good clarity comparing to the regular PP homopolymer grades. SABIC® PP 5770N encompasses the following features: very high top load strength & down gauging potential; isotropy shrinkage performance (dimensional stability); high crystallization temperature and superior flow behavior (lower cycle time); easy mold filing for aesthetic & large items; clean product in combination of low / no odor & taste.

This material data has been provided by Matmatch.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

All categories

Properties

Mechanical

Property	Temperature	Value	Comment
Elongation at yield	23.0 °C	7 % Show Material materials with Elongation at yield of 7 %	ASTM D638
Flexural modulus	23.0 °C	1.68 GPa Show Material materials with Flexural modulus of 1.68 GPa	ASTM D790 A
Hardness, Rockwell L	23.0 °C	98 [-] Show Material materials with Hardness, Rockwell L of 98 [-]	ASTM D785
Yield strength	23.0 °C	40 MPa Show Material materials with Yield strength of 40 MPa	ASTM D638

Thermal

Property	Value	Comment
Vicat softening temperature	150 °C Show Material materials with Vicat softening temperature of 150 °C	ASTM D1525

Technological properties

Property
Application areas	Houseware & appliances

SABIC® PP 5770N

Description

Ashby charts

Suggested reading

Properties