SABIC® PP 578L

Want to keep this datasheet? Save it now in your required format

Description

SABIC® PP 578L is a PP homopolymer grade which contains a well balanced antistatic and slip agent package. This grade allows for cost efficient processing on the basis of good flow behavior, short cycle times, good demoulding and robust processing behaviour. Products made from SABIC® PP 578L typically have low warpage, high stiffness in combination with moderate impact strength at room temperature, good antistatic behavior and a high gloss. Application: SABIC® PP 578L is typically used in caps & closures and thin wall packaging both in food and non-food segments. Health, Safety and Food Contact regulations:Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC.com The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical / medical applications. This grade material is UL registered under File E111275 (www.ul.com) / IMDS 7172624

This material data has been provided by Matmatch.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

All categories

Properties

General

Property	Temperature	Value	Comment
Density	23.0 °C	0.91 g/cm³ Show Material materials with Density of 0.91 g/cm³	ASTM D1505

Mechanical

Property	Temperature	Value	Comment
Hardness, Shore D	23.0 °C	69 [-] Show Material materials with Hardness, Shore D of 69 [-]	ISO 868

Technological properties

Property
Application areas	It is typically used in caps & closures and thin wall packaging both in food and non-food segments.

SABIC® PP 578L

Description

Ashby charts

Suggested reading

Properties