SABIC® HDPE B5206

Want to keep this datasheet? Save it now in your required format

Description

HDPE B5206 is high density polyethylene specially developed for large blow molding / Jerry cans. The material offers high stiffness, good processability and excellent combination of stiffness/ESCR.

This material data has been provided by Matmatch.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Properties

General

Property	Temperature	Value	Comment
Density	23.0 °C	0.95 g/cm³ Show Material materials with Density of 0.95 g/cm³	ASTM D1505

Mechanical

Property	Temperature	Value	Comment
Elastic modulus	23.0 °C	1.05 GPa Show Material materials with Elastic modulus of 1.05 GPa	ASTM D638
Elongation at yield	23.0 °C	10 % Show Material materials with Elongation at yield of 10 %	ISO 527-1/-2
Impact strength, Charpy notched	-30.0 °C	36 kJ/m² Show Material materials with Impact strength, Charpy notched of 36 kJ/m²	ISO 179
Yield strength	23.0 °C	26 MPa Show Material materials with Yield strength of 26 MPa	ASTM D638

Rheological Properties

Property	Value	Comment
Melt mass-flow rate	6.5 g/10min Show Material materials with Melt mass-flow rate of 6.5 g/10min	ISO 1133 \| 190°C/21.6 kg

Technological properties

Property
Application areas	Jerry cans

SABIC® HDPE B5206

Description

Ashby charts

Suggested reading

Properties