SABIC® HDPE B5822

Want to keep this datasheet? Save it now in your required format

Description

HDPE B5822 is a High Density Polyethylene specially developed for small blow molded bottles. The material offers easy flow, higher stiffness, very good ESCR and sufficient impact strength.

This material data has been provided by Matmatch.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Properties

General

Property	Temperature	Value	Comment
Density	23.0 °C	0.96 g/cm³ Show Material materials with Density of 0.96 g/cm³	ASTM D1505

Mechanical

Property	Temperature	Value	Comment
Elastic modulus	23.0 °C	1.35 GPa Show Material materials with Elastic modulus of 1.35 GPa	ASTM D638
Elongation at yield	23.0 °C	7.5 % Show Material materials with Elongation at yield of 7.5 %	ISO 527-1/-2
Hardness, Shore D	23.0 °C	64 [-] Show Material materials with Hardness, Shore D of 64 [-]	ASTM D2240
Impact strength, Charpy notched	-30.0 °C	6.5 kJ/m² Show Material materials with Impact strength, Charpy notched of 6.5 kJ/m²	ISO 179
Impact strength, Izod notched	-30.0 °C	75 kJ/m² Show Material materials with Impact strength, Izod notched of 75 kJ/m²	ISO 8256
Yield strength	23.0 °C	28 MPa Show Material materials with Yield strength of 28 MPa	ISO 527-1/-2

Technological properties

Property
Application areas	Bottles

SABIC® HDPE B5822

Description

Ashby charts

Suggested reading

Properties