CYCOLOY™ FR Resins C2800

Want to keep this datasheet? Save it now in your required format

Description

CYCOLOY C2800 Polycarbonate/Acrylonitrile Butadiene Styrene (PC/ABS) resin is a standard grade that can be injection molded. This non-chlorinated, non-brominated flame retardant PC/ABS has a UL V0 & 5VB flame rating. CYCOLOY C2800 resin is an excellent candidate for a wide variety of applications including business equipment, monitors, and enclosures.

This material data has been provided by Matmatch.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyTemperatureValueComment

Density

23.0 °C

1.17 g/cm³

Show Material materials with Density of 1.17 g/cm³

ASTM D 792

Water absorption

23.0 °C

0.1 %

Show Material materials with Water absorption of 0.1 %

ASTM D 570 | 24 Hours

Water absorption, equilibrium

23.0 °C

0.4 %

Show Material materials with Water absorption, equilibrium of 0.4 %

ASTM D 570

Mechanical

PropertyTemperatureValueComment

Elastic modulus

23.0 °C

2.68 GPa

Show Material materials with Elastic modulus of 2.68 GPa

ASTM D 638 | 50 mm/min

Elongation

23.0 °C

50 %

Show Material materials with Elongation of 50 %

ASTM D 638 | Type I, 50 mm/min

Elongation at yield

23.0 °C

5 %

Show Material materials with Elongation at yield of 5 %

ASTM D 638 | Type I, 50 mm/min

Flexural modulus

23.0 °C

2.68 GPa

Show Material materials with Flexural modulus of 2.68 GPa

ASTM D 790 | 2.6 mm/min, 100 mm span

Flexural yield strength

23.0 °C

96 MPa

Show Material materials with Flexural yield strength of 96 MPa

ASTM D 790 | 2.6 mm/min, 100 mm span

Hardness, Rockwell R

23.0 °C

120 [-]

Show Material materials with Hardness, Rockwell R of 120 [-]

ASTM D 785

Impact strength, Izod notched, ASTM

23.0 °C

427 J/m

Show Material materials with Impact strength, Izod notched, ASTM of 427 J/m

ASTM D 256

Yield strength

23.0 °C

58 MPa

Show Material materials with Yield strength of 58 MPa

ASTM D 638 | Type I, 50 mm/min

Thermal

PropertyTemperatureValueComment

Coefficient of thermal expansion

23.0 °C

7.2E-5 1/K

Show Material materials with Coefficient of thermal expansion of 7.2E-5 1/K

ASTM E 831 | -40°C to 60°C

Coefficient of thermal expansion, transverse

23.0 °C

7.2E-5 1/K

Show Material materials with Coefficient of thermal expansion, transverse of 7.2E-5 1/K

ASTM E 831 | -40°C to 60°C

Heat deflection temperature, 1.80 MPa

80 °C

Show Material materials with Heat deflection temperature, 1.80 MPa of 80 °C

ASTM D 648 | 1.82 MPa, 6.4 mm, unannealed

Relative temperature index, electrical

80 °C

Show Material materials with Relative temperature index, electrical of 80 °C

UL 746B

Relative temperature index, mechanical impact

70 °C

Show Material materials with Relative temperature index, mechanical impact of 70 °C

UL 746B

Relative temperature index, mechanical strength

80 °C

Show Material materials with Relative temperature index, mechanical strength of 80 °C

UL 746B

Thermal conductivity

23.0 °C

0.2 W/(m·K)

Show Material materials with Thermal conductivity of 0.2 W/(m·K)

ASTM C177

Vicat softening temperature

90 °C

Show Material materials with Vicat softening temperature of 90 °C

ASTM D 1525 | Rate B/50

Flammability

UL Recognized, 94-5VB Flame Class Rating | 2.31mm | UL 94

Electrical

PropertyTemperatureValueComment

Comparative tracking index

23.0 °C

1 V

Show Material materials with Comparative tracking index of 1 V

UL 746A

Dielectric constant

23.0 °C

3 [-]

Show Material materials with Dielectric constant of 3 [-]

ASTM D 150 | at 100 Hz

Dielectric strength

23.0 °C

17.9 kV/mm

Show Material materials with Dielectric strength of 17.9 kV/mm

ASTM D 149 | in oil, 3.2 mm

Dissipation factor

23.0 °C

4.8E-3 [-]

Show Material materials with Dissipation factor of 4.8E-3 [-]

ASTM D 150 | at 50/60 Hz

Electrical resistivity

23.0 °C

1.00E+15 Ω·m

Show Material materials with Electrical resistivity of 1.00E+15 Ω·m

ASTM D 257

Rheological Properties

PropertyTemperatureValueComment

Melt mass-flow rate

16 g/10min

Show Material materials with Melt mass-flow rate of 16 g/10min

ASTM D 1238 | 260°C/2.16 kgf

Shrinkage

23.0 °C

0.4 - 0.6 %

Show Material materials with Shrinkage of 0.4 - 0.6 %

SABIC method | 3.2 mm

Shrinkage, transverse

23.0 °C

0.4 - 0.6 %

Show Material materials with Shrinkage, transverse of 0.4 - 0.6 %

SABIC method

Technological properties

Property
Application areas

Air Conditioning,Amusement Machine,ATM/Ticket Machine,Audio,Building Accessory,Circuit Protection,Data Management,Data Transfer,Dishwasher,Displays,Document Handling,Electronic Components,Enclosure/Housing/Cover,Enclosures,Energy Management,Freezer,Furnace/Heater,Heavy Vehicles,Infotainment/Telematic,Lab Ware and Clinical Diagnostics,Laundry Dryer,LED Lighting,Medical Device,Meter Gas,Monitoring and Imaging,Non-LED Lighting,Personal Computing,Pharmaceutical Packaging & Drug Delivery,Power Manangement,Refrigerator,Sail Boat,Security/Detection,Small Appliance,Surgical Tray,Trim,Vacuum Cleaner,Vending Machine,Washing Machine,Wearables,Wireless Communications,Wiring Devices

Processing methods

Drying Temperature: 75-80°C, Drying Time: 3-4hrs, Drying Time (Cumulative): 8hrs, Maximum Moisture Content: 0.04%, Melt Temperature: 230-275°C, Nozzle Temperature: 230-275°C, Front - Zone 3 Temperature: 225-275°C, Middle - Zone 2 Temperature: 215-260°C, Rear - Zone 1 Temperature: 210-255°C, Mold Temperature: 50-70°C, Back Pressure: 0.3-0.7MPa, Screw Speed: 40-70rpm, Shot to Cylinder Size: 30-80%, Vent Depth: 0.038-0.076mm