CYCOLOY™ FR Resins CE3510

Want to keep this datasheet? Save it now in your required format

Description

CYCOLOY CE3510 Polycarbonate/Acrylonitrile Butadiene Styrene (PC/ABS) blend is a high impact, non chlorinated/brominated flame retardant grade that can be injection molded or extruded. It has an MVR (260°C/5kg) of 8 and a UL94 V0@1.5mm flame rating.

This material data has been provided by Matmatch.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyTemperatureValueComment

Density

23.0 °C

1.2 g/cm³

Show Material materials with Density of 1.2 g/cm³

ASTM D 792

Mechanical

PropertyTemperatureValueComment

Elastic modulus

23.0 °C

2.68 GPa

Show Material materials with Elastic modulus of 2.68 GPa

ASTM D 638 | 50 mm/min

Elongation

23.0 °C

35 %

Show Material materials with Elongation of 35 %

ASTM D 638 | Type I, 50 mm/min

Elongation at yield

23.0 °C

4.3 %

Show Material materials with Elongation at yield of 4.3 %

ASTM D 638 | Type I, 50 mm/min

Flexural modulus

23.0 °C

2.47 GPa

Show Material materials with Flexural modulus of 2.47 GPa

ISO 178 | 2 mm/min

Flexural yield strength

23.0 °C

95 MPa

Show Material materials with Flexural yield strength of 95 MPa

ISO 178 | 2 mm/min

Impact strength, Charpy notched

-30.0 °C

14 kJ/m²

Show Material materials with Impact strength, Charpy notched of 14 kJ/m²

ISO 179/1eA

23.0 °C

45 kJ/m²

Show Material materials with Impact strength, Charpy notched of 45 kJ/m²

ISO 179/1eA

Impact strength, Izod notched

-30.0 °C

12 kJ/m²

Show Material materials with Impact strength, Izod notched of 12 kJ/m²

ISO 180/1A

23.0 °C

14 - 20 kJ/m²

Show Material materials with Impact strength, Izod notched of 14 - 20 kJ/m²

ISO 180/1A

Unlock all property charts

Impact strength, Izod notched, ASTM

-30.0 °C

109 J/m

Show Material materials with Impact strength, Izod notched, ASTM of 109 J/m

ASTM D 256

23.0 °C

664 J/m

Show Material materials with Impact strength, Izod notched, ASTM of 664 J/m

ASTM D 256

Unlock all property charts

Tensile strength

23.0 °C

49 MPa

Show Material materials with Tensile strength of 49 MPa

ASTM D 638 | Type I, 50 mm/min

Yield strength

23.0 °C

64 MPa

Show Material materials with Yield strength of 64 MPa

ASTM D 638 | Type I, 50 mm/min

Impact strength, Charpy unnotched

No Break @ 23,-30°C | ISO 179/1eU

Impact strength, Izod unnotched

No Break @ 23,-30°C| ISO 180/1U

Thermal

PropertyValueComment

Heat deflection temperature, 1.80 MPa

100 °C

Show Material materials with Heat deflection temperature, 1.80 MPa of 100 °C

ASTM D 648 | 1.82 MPa, 3.2mm, unannealed

Relative temperature index, electrical

90 °C

Show Material materials with Relative temperature index, electrical of 90 °C

UL 746B

Relative temperature index, mechanical impact

90 °C

Show Material materials with Relative temperature index, mechanical impact of 90 °C

UL 746B

Relative temperature index, mechanical strength

90 °C

Show Material materials with Relative temperature index, mechanical strength of 90 °C

UL 746B

Vicat softening temperature

118 °C

Show Material materials with Vicat softening temperature of 118 °C

ISO 306 | Rate B/120

Flammability

UL Recognized, 94V-0 Flame Class Rating | 1.5mm | UL 94

Electrical

PropertyTemperatureValueComment

Comparative tracking index

23.0 °C

225 V

Show Material materials with Comparative tracking index of 225 V

IEC 60112

Dielectric strength

23.0 °C

18 kV/mm

Show Material materials with Dielectric strength of 18 kV/mm

IEC 60243-1 | in oil, 3.2 mm

Rheological Properties

PropertyTemperatureValueComment

Melt volume-flow rate

8 cm³/10min

Show Material materials with Melt volume-flow rate of 8 cm³/10min

ISO 1133 | 260°C/5.0 kg

Shrinkage

23.0 °C

0.4 - 0.6 %

Show Material materials with Shrinkage of 0.4 - 0.6 %

SABIC method

Shrinkage, transverse

23.0 °C

0.4 - 0.6 %

Show Material materials with Shrinkage, transverse of 0.4 - 0.6 %

SABIC method

Technological properties

Property
Application areas

Building Element,Building/Construction Sheet,City,Electronic Components,Exterior Rail Components,Non-LED Lighting,Wiring Devices

Processing methods

Drying Temperature: 80-90°C, Drying Time: 3-4hrs, Maximum Moisture Content: 0.02%, Melt Temperature: 250-280°C, Nozzle Temperature: 250-280°C, Front - Zone 3 Temperature: 250-280°C, Middle - Zone 2 Temperature: 245-275°C, Rear - Zone 1 Temperature: 240-270°C, Hopper Temperature: 60-80°C, Mold Temperature: 60-80°C, Drying Temperature: 80-85°C, Drying Time: 2-4hrs, Melt Temperature: 230-270°C, Barrel - Zone 1 Temperature: 235-260°C, Barrel - Zone 2 Temperature: 240-265°C, Barrel - Zone 3 Temperature: 245-270°C, Barrel - Zone 4 Temperature: 245-270°C, Hopper Temperature: 60-80°C, Adapter Temperature: 245-270°C, Die Temperature: 235-260°C