CYCOLAC™ Resin DL100

Want to keep this datasheet? Save it now in your required format

Description

CYCOLAC DL100 is a high heat, high impact, low emissions ABS/PC blend.

This material data has been provided by Matmatch.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyTemperatureValueComment

Density

23.0 °C

1.08 g/cm³

Show Material materials with Density of 1.08 g/cm³

ISO 1183

Mechanical

PropertyTemperatureValueComment

Elastic modulus

23.0 °C

2.2 GPa

Show Material materials with Elastic modulus of 2.2 GPa

ISO 527 | 1 mm/min

Elongation

23.0 °C

10 %

Show Material materials with Elongation of 10 %

ISO 527 | 50 mm/min

Elongation at yield

23.0 °C

3.4 %

Show Material materials with Elongation at yield of 3.4 %

ISO 527 | 50 mm/min

Flexural modulus

23.0 °C

2.25 GPa

Show Material materials with Flexural modulus of 2.25 GPa

ISO 178 | 2 mm/min

Flexural yield strength

23.0 °C

69 MPa

Show Material materials with Flexural yield strength of 69 MPa

ISO 178 | 2 mm/min

Hardness, Ball Indentation

23.0 °C

91 MPa

Show Material materials with Hardness, Ball Indentation of 91 MPa

ISO 2039-1

Impact strength, Charpy notched

-30.0 °C

14 kJ/m²

Show Material materials with Impact strength, Charpy notched of 14 kJ/m²

ISO 179/1eA

23.0 °C

34 kJ/m²

Show Material materials with Impact strength, Charpy notched of 34 kJ/m²

ISO 179/1eA

Impact strength, Izod notched

-30.0 °C

15 kJ/m²

Show Material materials with Impact strength, Izod notched of 15 kJ/m²

ISO 180/1A

23.0 °C

35 kJ/m²

Show Material materials with Impact strength, Izod notched of 35 kJ/m²

ISO 180/1A

Unlock all property charts

Yield strength

23.0 °C

45 MPa

Show Material materials with Yield strength of 45 MPa

ISO 527 | 50 mm/min

Thermal

PropertyTemperatureValueComment

Coefficient of thermal expansion

23.0 °C

9.8E-5 1/K

Show Material materials with Coefficient of thermal expansion of 9.8E-5 1/K

ISO 11359-2 | 23°C to 60°C

Coefficient of thermal expansion, transverse

23.0 °C

9.8E-5 1/K

Show Material materials with Coefficient of thermal expansion, transverse of 9.8E-5 1/K

ISO 11359-2 | 23°C to 60°C

Heat deflection temperature, 1.80 MPa

87 °C

Show Material materials with Heat deflection temperature, 1.80 MPa of 87 °C

ISO 75/Ae | 1.8 MPa

Relative temperature index, electrical

60 °C

Show Material materials with Relative temperature index, electrical of 60 °C

UL 746B

Relative temperature index, mechanical impact

60 °C

Show Material materials with Relative temperature index, mechanical impact of 60 °C

UL 746B

Relative temperature index, mechanical strength

60 °C

Show Material materials with Relative temperature index, mechanical strength of 60 °C

UL 746B

Thermal conductivity

23.0 °C

0.2 W/(m·K)

Show Material materials with Thermal conductivity of 0.2 W/(m·K)

ISO 8302

Vicat softening temperature

107 °C

Show Material materials with Vicat softening temperature of 107 °C

ISO 306 | Rate B/120

Flammability

UL Recognized, 94HB Flame Class Rating 2nd value | 3mm | UL 94

Rheological Properties

PropertyTemperatureValueComment

Melt volume-flow rate

8 cm³/10min

Show Material materials with Melt volume-flow rate of 8 cm³/10min

ISO 1133 | 260°C/5.0 kg

Shrinkage

23.0 °C

0.5 - 0.7 %

Show Material materials with Shrinkage of 0.5 - 0.7 %

SABIC method

Technological properties

Property
Application areas

ATM/Ticket Machine,Auto Aftermarket,Cluster,Console,Displays,Doors Hardware/Trim,Electronic Components,Enclosure/Housing/Cover,Enclosures,Energy Management,Exterior Trim,Front Grille,HVAC Underhood,Interior,Long Distance Coach,Meter Gas,Motorcycle,Rail Cabin Interiors,Rear/Signal Lighting,Recreational Vehicle,Seat,Small Appliance,Travel Suitcase,Trim

Processing methods

Drying Temperature: 90-100°C, Drying Time: 2-4hrs, Maximum Moisture Content: 0.1%, Melt Temperature: 250-280°C, Nozzle Temperature: 245-275°C, Front - Zone 3 Temperature: 250-280°C, Middle - Zone 2 Temperature: 250-280°C, Rear - Zone 1 Temperature: 230-260°C, Hopper Temperature: 60-80°C, Mold Temperature: 40-80°C