CYCOLAC™ Resin EX75

Want to keep this datasheet? Save it now in your required format

Description

Multi-purpose, extrusion ABS providing a favorable balance of engineering properties.

This material data has been provided by Matmatch.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyTemperatureValueComment

Density

23.0 °C

1.04 g/cm³

Show Material materials with Density of 1.04 g/cm³

ASTM D 792

Mechanical

PropertyTemperatureValueComment

Elastic modulus

23.0 °C

2.13 GPa

Show Material materials with Elastic modulus of 2.13 GPa

ASTM D 638 | 5 mm/min

Elongation

23.0 °C

42.9 %

Show Material materials with Elongation of 42.9 %

ASTM D 638 | Type I, 5 mm/min

Elongation at yield

23.0 °C

2.4 %

Show Material materials with Elongation at yield of 2.4 %

ASTM D 638 | Type I, 5 mm/min

Flexural modulus

23.0 °C

2.4 GPa

Show Material materials with Flexural modulus of 2.4 GPa

ASTM D 790 | 1.3 mm/min, 50 mm span

Flexural yield strength

23.0 °C

73 MPa

Show Material materials with Flexural yield strength of 73 MPa

ASTM D 790 | 1.3 mm/min, 50 mm span

Impact strength, Izod notched, ASTM

23.0 °C

421 J/m

Show Material materials with Impact strength, Izod notched, ASTM of 421 J/m

ASTM D 256

Tensile strength

23.0 °C

33 MPa

Show Material materials with Tensile strength of 33 MPa

ASTM D 638 | Type I, 5 mm/min

Yield strength

23.0 °C

39 MPa

Show Material materials with Yield strength of 39 MPa

ASTM D 638 | Type I, 5 mm/min

Thermal

PropertyTemperatureValueComment

Coefficient of thermal expansion

23.0 °C

7.92E-5 1/K

Show Material materials with Coefficient of thermal expansion of 7.92E-5 1/K

ASTM E 831 | -40°C to 40°C

Coefficient of thermal expansion, transverse

23.0 °C

8.1E-5 1/K

Show Material materials with Coefficient of thermal expansion, transverse of 8.1E-5 1/K

ASTM E 831 | -40°C to 40°C

Heat deflection temperature, 1.80 MPa

82 °C

Show Material materials with Heat deflection temperature, 1.80 MPa of 82 °C

ASTM D 648 | 1.82 MPa, 3.2mm, unannealed

Vicat softening temperature

106 °C

Show Material materials with Vicat softening temperature of 106 °C

ASTM D 1525 | Rate B/50

Rheological Properties

PropertyTemperatureValueComment

Melt viscosity

23.0 °C

1160 Pa·s

Show Material materials with Melt viscosity of 1160 Pa·s

ASTM D 3825 | 240°C, 100 sec⁻¹

Melt volume-flow rate

9 cm³/10min

Show Material materials with Melt volume-flow rate of 9 cm³/10min

ISO 1133 | 220°C/10.0 kg

Shrinkage

23.0 °C

0.5 - 0.7 %

Show Material materials with Shrinkage of 0.5 - 0.7 %

SABIC method | 3.2 mm

Technological properties

Property
Application areas

Building/Construction Sheet

Processing methods

Drying Temperature: 90-95°C, Drying Time (Cumulative): 4hrs, Maximum Moisture Content: 0%, Melt Temperature: 200-220°C, Barrel - Zone 1 Temperature: 170-190°C, Barrel - Zone 2 Temperature: 180-200°C, Barrel - Zone 3 Temperature: 175-205°C, Barrel - Zone 4 Temperature: 180-210°C, Adapter Temperature: 180-205°C, Die Temperature: 180-215°C