SABIC® LDPE HP7023

Want to keep this datasheet? Save it now in your required format

Description

HP7023 is a Low Density Polyethylene grade that offers a unique combination of consistent processability, flexibility and toughness. Articles manufactured from HP7023 exhibits excellent impact strength, low shrinkage and good gloss.

This material data has been provided by Matmatch.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

All categories

Properties

General

Property	Temperature	Value	Comment
Density	23.0 °C	0.92 g/cm³ Show Material materials with Density of 0.92 g/cm³	ASTM D1505

Mechanical

Property	Temperature	Value	Comment
Elongation	23.0 °C	80 % Show Material materials with Elongation of 80 %	ASTM D638
Hardness, Shore D	23.0 °C	43 [-] Show Material materials with Hardness, Shore D of 43 [-]	ASTM D2240
Impact strength, Izod notched, ASTM	23.0 °C	490 J/m Show Material materials with Impact strength, Izod notched, ASTM of 490 J/m	ASTM D 256
Tensile strength	23.0 °C	10.5 MPa Show Material materials with Tensile strength of 10.5 MPa	ASTM D638
Yield strength	23.0 °C	9 MPa Show Material materials with Yield strength of 9 MPa	ASTM D638

Thermal

Property	Value	Comment
Vicat softening temperature	89 °C Show Material materials with Vicat softening temperature of 89 °C	ASTM D1525

Rheological Properties

Property	Value	Comment
Melt mass-flow rate	7 g/10min Show Material materials with Melt mass-flow rate of 7 g/10min	ASTM D1238 \| 190°C/2.16 kg

Technological properties

Property
Application areas	Caps & closures,Masterbatch

SABIC® LDPE HP7023

Description

Ashby charts

Suggested reading

Properties