SABIC® PMMA IN20HR

Want to keep this datasheet? Save it now in your required format

Description

SABIC® PMMA IN20HR is a PMMA grade with good heat resistance property suitable for extrusion and injection molding applications targeting unexposed applications to ultraviolet radiation. The grade is available in pellet form.

This material data has been provided by Matmatch.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Properties

General

Property	Temperature	Value	Comment
Density	23.0 °C	1.19 g/cm³ Show Material materials with Density of 1.19 g/cm³	ISO 1183
Water absorption	23.0 °C	0.3 % Show Material materials with Water absorption of 0.3 %	ISO 62 \| 24 Hours

Mechanical

Property	Temperature	Value	Comment
Elastic modulus	23.0 °C	3.3 GPa Show Material materials with Elastic modulus of 3.3 GPa	ISO 527
Elongation	23.0 °C	6 % Show Material materials with Elongation of 6 %	ISO 527
Flexural modulus	23.0 °C	3.3 GPa Show Material materials with Flexural modulus of 3.3 GPa	ISO 178 \| 2 mm/min
Flexural strength	23.0 °C	140 MPa Show Material materials with Flexural strength of 140 MPa	ISO 178
Hardness, Rockwell M	23.0 °C	101 [-] Show Material materials with Hardness, Rockwell M of 101 [-]	ISO 2039
Impact strength, Charpy notched	23.0 °C	1.4 kJ/m² Show Material materials with Impact strength, Charpy notched of 1.4 kJ/m²	ISO 179
Impact strength, Charpy unnotched	23.0 °C	20 kJ/m² Show Material materials with Impact strength, Charpy unnotched of 20 kJ/m²	ISO 179
Tensile strength	23.0 °C	77 MPa Show Material materials with Tensile strength of 77 MPa	ISO 527

Thermal

Property	Temperature	Value	Comment
Coefficient of thermal expansion, transverse	23.0 °C	6E-5 1/K Show Material materials with Coefficient of thermal expansion, transverse of 6E-5 1/K	ASTM D 696 \| -30°C to 30°C
Heat deflection temperature, 1.80 MPa		100 °C Show Material materials with Heat deflection temperature, 1.80 MPa of 100 °C	ISO 75-1&2 \| 1.8 MPa
Thermal conductivity	23.0 °C	0.2 W/(m·K) Show Material materials with Thermal conductivity of 0.2 W/(m·K)	ASTM C177
Vicat softening temperature		107 °C Show Material materials with Vicat softening temperature of 107 °C	ISO 306 \| B50

Optical

Property	Value	Comment
Haze	0.3 % Show Material materials with Haze of 0.3 %	ISO 14782
Luminous transmittance	93 [-] Show Material materials with Luminous transmittance of 93 [-]	ISO 13468
Refractive index	1.49 [-] Show Material materials with Refractive index of 1.49 [-]	ISO 489

Rheological Properties

Property	Value	Comment
Melt mass-flow rate	2 g/10min Show Material materials with Melt mass-flow rate of 2 g/10min	ISO 1133 \| 230°C/3.16 kg

Technological properties

Property
Application areas	Lighting

SABIC® PMMA IN20HR

Description

Ashby charts

Suggested reading

Properties