CYCOLAC™ Resin INP563

Want to keep this datasheet? Save it now in your required format

Description

Medium flow powder SAN for color concentrates and alloys. FDA compliant (part use must be at room temperature or below).

This material data has been provided by Matmatch.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Properties

General

Property	Temperature	Value	Comment
Density	23.0 °C	1.08 g/cm³ Show Material materials with Density of 1.08 g/cm³	ASTM D 792

Mechanical

Property	Temperature	Value	Comment
Elastic modulus	23.0 °C	3.86 GPa Show Material materials with Elastic modulus of 3.86 GPa	ASTM D 638 \| 5 mm/min
Elongation	23.0 °C	2.4 % Show Material materials with Elongation of 2.4 %	ASTM D 638 \| Type I, 5 mm/min
Elongation at yield	23.0 °C	2.4 % Show Material materials with Elongation at yield of 2.4 %	ASTM D 638 \| Type I, 5 mm/min
Flexural modulus	23.0 °C	3.46 GPa Show Material materials with Flexural modulus of 3.46 GPa	ISO 178 \| 2 mm/min
Flexural yield strength	23.0 °C	46 MPa Show Material materials with Flexural yield strength of 46 MPa	ISO 178 \| 2 mm/min
Hardness, Rockwell R	23.0 °C	123 [-] Show Material materials with Hardness, Rockwell R of 123 [-]	ASTM D 785
Impact strength, Charpy notched	23.0 °C	1 kJ/m² Show Material materials with Impact strength, Charpy notched of 1 kJ/m²	ISO 179/2C
Impact strength, Izod notched	-30.0 °C	2 kJ/m² Show Material materials with Impact strength, Izod notched of 2 kJ/m²	ISO 180/1A
	23.0 °C	2 kJ/m² Show Material materials with Impact strength, Izod notched of 2 kJ/m²	ISO 180/1A

Impact strength, Izod notched, ASTM	-30.0 °C	22 J/m Show Material materials with Impact strength, Izod notched, ASTM of 22 J/m	ASTM D 256
	23.0 °C	18 J/m Show Material materials with Impact strength, Izod notched, ASTM of 18 J/m	ASTM D 256
	Unlock all property charts
Tensile strength	23.0 °C	69 MPa Show Material materials with Tensile strength of 69 MPa	ASTM D 638 \| Type I, 5 mm/min
Yield strength	23.0 °C	69 MPa Show Material materials with Yield strength of 69 MPa	ASTM D 638 \| Type I, 5 mm/min

Thermal

Property	Value	Comment
Heat deflection temperature, 1.80 MPa	82 °C Show Material materials with Heat deflection temperature, 1.80 MPa of 82 °C	ASTM D 648 \| 1.82 MPa, 3.2mm, unannealed
Vicat softening temperature	104 °C Show Material materials with Vicat softening temperature of 104 °C	ISO 306 \| Rate B/120

Rheological Properties

Property	Value	Comment
Melt mass-flow rate	47 g/10min Show Material materials with Melt mass-flow rate of 47 g/10min	ISO 1133 \| 220°C/10.0 kg

Technological properties

Property
Application areas	Impact modification

CYCOLAC™ Resin INP563

Description

Ashby charts

Suggested reading

Properties