CYCOLAC™ Resin INP576

Want to keep this datasheet? Save it now in your required format

Description

Medium flow SAN pellets. FDA compliant (part use must be at room temperature or below).

This material data has been provided by Matmatch.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyTemperatureValueComment

Density

23.0 °C

1.08 g/cm³

Show Material materials with Density of 1.08 g/cm³

ASTM D 792

Mechanical

PropertyTemperatureValueComment

Elastic modulus

23.0 °C

3.97 GPa

Show Material materials with Elastic modulus of 3.97 GPa

ASTM D 638 | 5 mm/min

Elongation

23.0 °C

2.2 %

Show Material materials with Elongation of 2.2 %

ASTM D 638 | Type I, 5 mm/min

Elongation at yield

23.0 °C

1.4 %

Show Material materials with Elongation at yield of 1.4 %

ASTM D 638 | Type I, 5 mm/min

Flexural modulus

23.0 °C

3.54 GPa

Show Material materials with Flexural modulus of 3.54 GPa

ISO 178 | 2 mm/min

Flexural yield strength

23.0 °C

68 MPa

Show Material materials with Flexural yield strength of 68 MPa

ISO 178 | 2 mm/min

Hardness, Rockwell R

23.0 °C

122 [-]

Show Material materials with Hardness, Rockwell R of 122 [-]

ASTM D 785

Impact strength, Charpy unnotched

23.0 °C

1 kJ/m²

Show Material materials with Impact strength, Charpy unnotched of 1 kJ/m²

ISO 179/2C

Impact strength, Izod notched

-30.0 °C

1 kJ/m²

Show Material materials with Impact strength, Izod notched of 1 kJ/m²

ISO 180/1A

23.0 °C

1 kJ/m²

Show Material materials with Impact strength, Izod notched of 1 kJ/m²

ISO 180/1A

Impact strength, Izod notched, ASTM

-30.0 °C

13 J/m

Show Material materials with Impact strength, Izod notched, ASTM of 13 J/m

ASTM D 256

23.0 °C

21 J/m

Show Material materials with Impact strength, Izod notched, ASTM of 21 J/m

ASTM D 256

Unlock all property charts

Tensile strength

23.0 °C

68 MPa

Show Material materials with Tensile strength of 68 MPa

ASTM D 638 | Type I, 5 mm/min

Yield strength

23.0 °C

41 MPa

Show Material materials with Yield strength of 41 MPa

ASTM D 638 | Type I, 5 mm/min

Thermal

PropertyValueComment

Heat deflection temperature, 1.80 MPa

87 °C

Show Material materials with Heat deflection temperature, 1.80 MPa of 87 °C

ASTM D 648 | 1.82 MPa, 3.2mm, unannealed

Vicat softening temperature

106 °C

Show Material materials with Vicat softening temperature of 106 °C

ISO 306 | Rate B/120

Rheological Properties

PropertyValueComment

Melt mass-flow rate

78 g/10min

Show Material materials with Melt mass-flow rate of 78 g/10min

ISO 1133 | 220°C/10.0 kg

Technological properties

Property
Application areas

Additive Semiconductor Materials

Processing methods

Drying Temperature: 75-85°C, Drying Time (Cumulative): 2-4hrs, Maximum Moisture Content: 0.1%, Melt Temperature: 190-220°C, Nozzle Temperature: 190-220°C, Front - Zone 3 Temperature: 190-210°C, Middle - Zone 2 Temperature: 180-200°C, Rear - Zone 1 Temperature: 170-190°C, Mold Temperature: 50-70°C, Screw Speed: 40-70rpm