CYCOLAC™ Resin INPBMAT

Want to keep this datasheet? Save it now in your required format

Description

Cross-linked SAN in styrenic matrix. Provides excellent gloss reduction properties. Maintains original polymer properties such as impact etc. Compatible with various polymer such as PVC and ABS. Can be used in low gloss ABS products at typical loading around 5PHR. Can be effectively compounded with ABS and other styrenic thermoplastics in molded, extruded or calendered applications to provide excellent gloss reduction properties without losing other physical performance.

This material data has been provided by Matmatch.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

Properties

General

PropertyTemperatureValueComment

Density

23.0 °C

1.07 g/cm³

Show Material materials with Density of 1.07 g/cm³

ASTM D 792

Mechanical

PropertyTemperatureValueComment

Flexural modulus

23.0 °C

3.4 GPa

Show Material materials with Flexural modulus of 3.4 GPa

ISO 178 | 2 mm/min

Flexural yield strength

23.0 °C

38 MPa

Show Material materials with Flexural yield strength of 38 MPa

ISO 178 | 2 mm/min

Impact strength, Izod notched

-30.0 °C

1 kJ/m²

Show Material materials with Impact strength, Izod notched of 1 kJ/m²

ISO 180/1A

23.0 °C

2 kJ/m²

Show Material materials with Impact strength, Izod notched of 2 kJ/m²

ISO 180/1A

Impact strength, Izod notched, ASTM

23.0 °C

18 J/m

Show Material materials with Impact strength, Izod notched, ASTM of 18 J/m

ASTM D 256

Thermal

PropertyValueComment

Heat deflection temperature, 1.80 MPa

86 °C

Show Material materials with Heat deflection temperature, 1.80 MPa of 86 °C

ASTM D 648 | 1.82 MPa, 3.2mm, unannealed

Vicat softening temperature

102 °C

Show Material materials with Vicat softening temperature of 102 °C

ISO 306 | Rate B/120

Rheological Properties

PropertyValueComment

Melt mass-flow rate

0 g/10min

Show Material materials with Melt mass-flow rate of 0 g/10min

ISO 1133 | 220°C/10.0 kg

Technological properties

Property
Application areas

Enclosures