SABIC® HDPE M80064S

Want to keep this datasheet? Save it now in your required format

Description

M80064S is a UV stabilized, High Density Polyethylene injection molding grade with a narrow molecular weight distribution. It is typically used for injection molding applications where rigidity, toughness and warp resistance are required..Typical moulding conditions for SABIC® HDPE M80064S are:This product is not intended for and must not be used in any pharmaceutical/medical applications.

This material data has been provided by Matmatch.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

All categories

Properties

General

Property	Temperature	Value	Comment
Density	23.0 °C	0.96 g/cm³ Show Material materials with Density of 0.96 g/cm³	ASTM D1505

Mechanical

Property	Temperature	Value	Comment
Flexural modulus	23.0 °C	1.65 GPa Show Material materials with Flexural modulus of 1.65 GPa	ASTM D 790
Flexural strength	23.0 °C	42 MPa Show Material materials with Flexural strength of 42 MPa	ASTM D790
Hardness, Shore D	23.0 °C	62 [-] Show Material materials with Hardness, Shore D of 62 [-]	ASTM D2240
Impact strength, Izod notched, ASTM	23.0 °C	75 J/m Show Material materials with Impact strength, Izod notched, ASTM of 75 J/m	ASTM D256
Tensile strength	23.0 °C	18 MPa Show Material materials with Tensile strength of 18 MPa	ASTM D638
Yield strength	23.0 °C	26 MPa Show Material materials with Yield strength of 26 MPa	ASTM D638

Thermal

Property	Value	Comment
Vicat softening temperature	125 °C Show Material materials with Vicat softening temperature of 125 °C	ASTM D1525

Technological properties

Property
Application areas	Crates & boxes,Pallets,Containers & pails

SABIC® HDPE M80064S

Description

Ashby charts

Suggested reading

Properties