CYCOLAC™ Resin MG37EPX

Want to keep this datasheet? Save it now in your required format

Description

ABS plating grade optimized for a broad processing window for both painted and plated applications. NSF standard 61 compliant (80 sq in/L)

This material data has been provided by Matmatch.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyTemperatureValueComment

Density

23.0 °C

1.05 g/cm³

Show Material materials with Density of 1.05 g/cm³

ISO 1183

Mechanical

PropertyTemperatureValueComment

Elastic modulus

23.0 °C

2.76 GPa

Show Material materials with Elastic modulus of 2.76 GPa

ISO 527 | 1 mm/min

Elongation

23.0 °C

15.8 %

Show Material materials with Elongation of 15.8 %

ISO 527 | 5 mm/min

Elongation at yield

23.0 °C

2 %

Show Material materials with Elongation at yield of 2 %

ISO 527 | 5 mm/min

Flexural modulus

23.0 °C

2.47 GPa

Show Material materials with Flexural modulus of 2.47 GPa

ISO 178 | 2 mm/min

Flexural yield strength

23.0 °C

73 MPa

Show Material materials with Flexural yield strength of 73 MPa

ISO 178 | 2 mm/min

Impact strength, Izod notched

-40.0 °C

6 kJ/m²

Show Material materials with Impact strength, Izod notched of 6 kJ/m²

ISO 180/1A

-30.0 °C

8 kJ/m²

Show Material materials with Impact strength, Izod notched of 8 kJ/m²

ISO 180/1A

23.0 °C

23 kJ/m²

Show Material materials with Impact strength, Izod notched of 23 kJ/m²

ISO 180/1A

Tensile strength

23.0 °C

39 MPa

Show Material materials with Tensile strength of 39 MPa

ISO 527 | 5 mm/min

Yield strength

23.0 °C

48 MPa

Show Material materials with Yield strength of 48 MPa

ISO 527 | 5 mm/min

Thermal

PropertyTemperatureValueComment

Coefficient of thermal expansion

23.0 °C

6E-5 1/K

Show Material materials with Coefficient of thermal expansion of 6E-5 1/K

ISO 11359-2 | -40°C to 40°C

Coefficient of thermal expansion, transverse

23.0 °C

6E-5 1/K

Show Material materials with Coefficient of thermal expansion, transverse of 6E-5 1/K

ISO 11359-2 | -40°C to 40°C

Heat deflection temperature, 1.80 MPa

82 °C

Show Material materials with Heat deflection temperature, 1.80 MPa of 82 °C

ISO 75/Af | 1.8 MPa

Vicat softening temperature

98 °C

Show Material materials with Vicat softening temperature of 98 °C

ISO 306 | Rate B/50

Rheological Properties

PropertyTemperatureValueComment

Melt mass-flow rate

20.6 g/10min

Show Material materials with Melt mass-flow rate of 20.6 g/10min

ASTM D 1238 | 220°C/10 kg

Shrinkage

23.0 °C

0.4 - 0.6 %

Show Material materials with Shrinkage of 0.4 - 0.6 %

SABIC method | 3.2 mm

Technological properties

Property
Application areas

Air Cabin Interiors,Applique,Auto Aftermarket,Body Protection,Cladding,Cluster,Console,Data Management,Dishwasher,Document Handling,Door Handle,Doors Hardware/Trim,Electronic Components,Enclosure/Housing/Cover,Enclosures,Exterior Mirror,Exterior Rail Components,Exterior Trim,Exterior,Fixture Bath/Shower,Food Processor,Food Transportation,Front Grille,Heavy Vehicles,Hygiene/Personal Care,Laundry Dryer,Lawn/Garden,LED Lighting,Lighting,Long Distance Coach,Medical Device,Medical Facility Infrastructure,Modular Panel,Monitoring and Imaging,Motorcycle,Neighborhood Electric Vehicle,Non-LED Lighting,Personal Water Craft,Pharmaceutical Packaging & Drug Delivery,Plumbing,Power Manangement,Rail Cabin Interiors,Rail,Rear/Signal Lighting,Recreational Vehicle,Refrigerator,Renal and Blood Handling,Respiratory,Seat,Skid Plate,Small Appliance,Surgical Devices,Trim,Underbody Shield,Washing Machine,Watch/Jewelry,Wheel Cover,Wireless Communications,Wiring Devices,Irrigation

Processing methods

Drying Temperature: 80-95°C, Drying Time: 2-4hrs, Drying Time (Cumulative): 8hrs, Maximum Moisture Content: 0.05%, Melt Temperature: 255-280°C, Nozzle Temperature: 255-280°C, Front - Zone 3 Temperature: 250-270°C, Middle - Zone 2 Temperature: 230-245°C, Rear - Zone 1 Temperature: 215-230°C, Mold Temperature: 40-80°C, Back Pressure: 0.3-0.7MPa, Screw Speed: 30-60rpm, Shot to Cylinder Size: 50-70%, Vent Depth: 0.038-0.051mm