CYCOLAC™ Resin MG47U

Want to keep this datasheet? Save it now in your required format

Description

Improved UV performance, multi-purpose, injection molding ABS providing a favorable balance of engineering properties.

This material data has been provided by Matmatch.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyTemperatureValueComment

Density

23.0 °C

1.04 g/cm³

Show Material materials with Density of 1.04 g/cm³

ASTM D 792

Mechanical

PropertyTemperatureValueComment

Elastic modulus

23.0 °C

2.5 GPa

Show Material materials with Elastic modulus of 2.5 GPa

ISO 527 | 1 mm/min

Elongation

23.0 °C

20 %

Show Material materials with Elongation of 20 %

ISO 527 | 50 mm/min

Elongation at yield

23.0 °C

2.4 %

Show Material materials with Elongation at yield of 2.4 %

ISO 527 | 50 mm/min

Flexural modulus

23.0 °C

2.25 GPa

Show Material materials with Flexural modulus of 2.25 GPa

ISO 178 | 2 mm/min

Flexural yield strength

23.0 °C

68 MPa

Show Material materials with Flexural yield strength of 68 MPa

ISO 178 | 2 mm/min

Hardness, Rockwell R

23.0 °C

112 [-]

Show Material materials with Hardness, Rockwell R of 112 [-]

ASTM D 785

Impact strength, Izod notched

-30.0 °C

8 kJ/m²

Show Material materials with Impact strength, Izod notched of 8 kJ/m²

ISO 180/1A

23.0 °C

20 kJ/m²

Show Material materials with Impact strength, Izod notched of 20 kJ/m²

ISO 180/1A

Tensile strength

23.0 °C

33 MPa

Show Material materials with Tensile strength of 33 MPa

ISO 527 | 50 mm/min

Yield strength

23.0 °C

45 MPa

Show Material materials with Yield strength of 45 MPa

ISO 527 | 50 mm/min

Thermal

PropertyTemperatureValueComment

Coefficient of thermal expansion

23.0 °C

8.82E-5 1/K

Show Material materials with Coefficient of thermal expansion of 8.82E-5 1/K

ASTM E 831 | -40°C to 40°C

Coefficient of thermal expansion, transverse

23.0 °C

8.82E-5 1/K

Show Material materials with Coefficient of thermal expansion, transverse of 8.82E-5 1/K

ASTM E 831 | -40°C to 40°C

Heat deflection temperature, 1.80 MPa

80 °C

Show Material materials with Heat deflection temperature, 1.80 MPa of 80 °C

ASTM D 648 | 1.82 MPa, 3.2mm, unannealed

Vicat softening temperature

99 °C

Show Material materials with Vicat softening temperature of 99 °C

ASTM D 1525 | Rate B/50

Rheological Properties

PropertyTemperatureValueComment

Melt mass-flow rate

17 g/10min

Show Material materials with Melt mass-flow rate of 17 g/10min

ISO 1133 | 220°C/10.0 kg

Melt viscosity

23.0 °C

225 Pa·s

Show Material materials with Melt viscosity of 225 Pa·s

ASTM D 3825 | 240°C, 1000 sec⁻¹

Shrinkage

23.0 °C

0.5 - 0.8 %

Show Material materials with Shrinkage of 0.5 - 0.8 %

SABIC method | 3.2 mm

Technological properties

Property
Application areas

Doors Hardware/Trim,Electronic Components,Exterior,Front Grille,Glove Box,Non-LED Lighting,Small Appliance,Trim,Washing Machine,Window,Wiring Devices

Processing methods

Drying Temperature: 80-95°C, Drying Time: 2-4hrs, Drying Time (Cumulative): 8hrs, Maximum Moisture Content: 0.1%, Melt Temperature: 220-260°C, Nozzle Temperature: 220-260°C, Front - Zone 3 Temperature: 215-240°C, Middle - Zone 2 Temperature: 205-225°C, Rear - Zone 1 Temperature: 190-210°C, Mold Temperature: 50-70°C, Back Pressure: 0.3-0.7MPa, Screw Speed: 30-60rpm, Shot to Cylinder Size: 50-70%, Vent Depth: 0.038-0.051mm