CYCOLAC™ Resin MG94

Want to keep this datasheet? Save it now in your required format

Description

Superior flow, injection molding ABS. Good impact. For thin-wall applications.

This material data has been provided by Matmatch.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyTemperatureValueComment

Density

23.0 °C

1.04 g/cm³

Show Material materials with Density of 1.04 g/cm³

ASTM D 792

Mechanical

PropertyTemperatureValueComment

Elastic modulus

23.0 °C

2.48 GPa

Show Material materials with Elastic modulus of 2.48 GPa

ASTM D 638 | 5 mm/min

Elongation

23.0 °C

18 %

Show Material materials with Elongation of 18 %

ASTM D 638 | Type I, 5 mm/min

Elongation at yield

23.0 °C

2 %

Show Material materials with Elongation at yield of 2 %

ASTM D 638 | Type I, 5 mm/min

Flexural modulus

23.0 °C

2.62 GPa

Show Material materials with Flexural modulus of 2.62 GPa

ASTM D 790 | 1.3 mm/min, 50 mm span

Flexural yield strength

23.0 °C

79 MPa

Show Material materials with Flexural yield strength of 79 MPa

ASTM D 790 | 1.3 mm/min, 50 mm span

Impact strength, Izod notched, ASTM

23.0 °C

240 J/m

Show Material materials with Impact strength, Izod notched, ASTM of 240 J/m

ASTM D 256

Tensile strength

23.0 °C

35 MPa

Show Material materials with Tensile strength of 35 MPa

ASTM D 638 | Type I, 5 mm/min

Yield strength

23.0 °C

46 MPa

Show Material materials with Yield strength of 46 MPa

ASTM D 638 | Type I, 5 mm/min

Thermal

PropertyTemperatureValueComment

Coefficient of thermal expansion

23.0 °C

8.82E-5 1/K

Show Material materials with Coefficient of thermal expansion of 8.82E-5 1/K

ASTM E 831 | -40°C to 40°C

Coefficient of thermal expansion, transverse

23.0 °C

8.46E-5 1/K

Show Material materials with Coefficient of thermal expansion, transverse of 8.46E-5 1/K

ASTM E 831 | -40°C to 40°C

Heat deflection temperature, 1.80 MPa

82 °C

Show Material materials with Heat deflection temperature, 1.80 MPa of 82 °C

ASTM D 648 | 1.82 MPa, 3.2mm, unannealed

Relative temperature index, electrical

60 °C

Show Material materials with Relative temperature index, electrical of 60 °C

UL 746B

Relative temperature index, mechanical impact

60 °C

Show Material materials with Relative temperature index, mechanical impact of 60 °C

UL 746B

Relative temperature index, mechanical strength

60 °C

Show Material materials with Relative temperature index, mechanical strength of 60 °C

UL 746B

Vicat softening temperature

98 °C

Show Material materials with Vicat softening temperature of 98 °C

ASTM D 1525 | Rate B/50

Flammability

UL Recognized, 94HB Flame Class Rating | 1.52mm | UL 94

Rheological Properties

PropertyTemperatureValueComment

Melt mass-flow rate

12 g/10min

Show Material materials with Melt mass-flow rate of 12 g/10min

ISO 1133 | 220°C/5.0 kg

Melt viscosity

23.0 °C

172 Pa·s

Show Material materials with Melt viscosity of 172 Pa·s

ASTM D 3825 | 240°C, 1000 sec⁻¹

Shrinkage

23.0 °C

0.5 - 0.8 %

Show Material materials with Shrinkage of 0.5 - 0.8 %

SABIC method | 3.2 mm

Technological properties

Property
Application areas

Air Conditioning,Audio,Auto Aftermarket,City,Data Transfer,Document Handling,Electronic Components,Enclosure/Housing/Cover,Enclosures,Fixture Bath/Shower,Fused Deposition Modeling (FDM),Heavy Vehicles,Industrial Material Handling,Medical Device,Microwave Oven,Motorcycle,Non-LED Lighting,Personal Care,Photovoltaic Components,Recreational Vehicle,Security/Detection,Small Appliance,Surgical Devices,Swimming Pool/Spa,Wireless Communications,Wiring Devices

Processing methods

Drying Temperature: 80-90°C, Drying Time: 2-4hrs, Drying Time (Cumulative): 8hrs, Maximum Moisture Content: 0.1%, Melt Temperature: 205-245°C, Nozzle Temperature: 205-245°C, Front - Zone 3 Temperature: 205-225°C, Middle - Zone 2 Temperature: 200-210°C, Rear - Zone 1 Temperature: 190-200°C, Mold Temperature: 50-70°C, Back Pressure: 0.3-0.7MPa, Screw Speed: 30-60rpm, Shot to Cylinder Size: 50-70%, Vent Depth: 0.038-0.051mm