General
Mechanical
| Property | Temperature | Value | Comment | ||
|---|---|---|---|---|---|
Elastic modulus | 23.0 °C | 2.3 GPa Show Material materials with Elastic modulus of 2.3 GPa | ASTM D 638 | 50 mm/min | ||
Elongation | 23.0 °C | 78 % Show Material materials with Elongation of 78 % | ASTM D 638 | Type I, 50 mm/min | ||
Elongation at yield | 23.0 °C | 6 % Show Material materials with Elongation at yield of 6 % | ASTM D 638 | Type I, 50 mm/min | ||
Flexural modulus | 23.0 °C | 2.31 GPa Show Material materials with Flexural modulus of 2.31 GPa | ASTM D 790 | 1.3 mm/min, 50 mm span | ||
Flexural yield strength | 23.0 °C | 97 MPa Show Material materials with Flexural yield strength of 97 MPa | ISO 178 | 2 mm/min | ||
Impact strength, Izod notched, ASTM | -30.0 °C | 128 J/m Show Material materials with Impact strength, Izod notched, ASTM of 128 J/m | ASTM D 256 | ||
23.0 °C | 910 J/m Show Material materials with Impact strength, Izod notched, ASTM of 910 J/m | ASTM D 256 | |||
Tensile strength | 23.0 °C | 60 MPa Show Material materials with Tensile strength of 60 MPa | ASTM D 638 | Type I, 50 mm/min | ||
Yield strength | 23.0 °C | 64 MPa Show Material materials with Yield strength of 64 MPa | ASTM D 638 | Type I, 50 mm/min | ||
Impact strength, Izod unnotched, ASTM | No break @ 23,-30°C | ASTM D 4812 | ||||
Thermal
| Property | Temperature | Value | Comment |
|---|---|---|---|
Coefficient of thermal expansion | 23.0 °C | 6.06E-5 1/K Show Material materials with Coefficient of thermal expansion of 6.06E-5 1/K | ISO 11359-2 | -40°C to 40°C |
Coefficient of thermal expansion, transverse | 23.0 °C | 6.16E-5 1/K Show Material materials with Coefficient of thermal expansion, transverse of 6.16E-5 1/K | ISO 11359-2 | -40°C to 40°C |
Heat deflection temperature, 1.80 MPa | 129 °C Show Material materials with Heat deflection temperature, 1.80 MPa of 129 °C | ASTM D 648 | 1.82 MPa, 6.4 mm, unannealed | |
Vicat softening temperature | 145 °C Show Material materials with Vicat softening temperature of 145 °C | ASTM D 1525 | Rate B/50 |
Electrical
| Property | Temperature | Value | Comment |
|---|---|---|---|
Dielectric constant | 23.0 °C | 2.8 [-] Show Material materials with Dielectric constant of 2.8 [-] | SABIC method | at 1.1 GHz |
Dissipation factor | 23.0 °C | 6.3E-3 [-] Show Material materials with Dissipation factor of 6.3E-3 [-] | SABIC method | at 1.1 GHz |
Optical
Rheological Properties
| Property | Temperature | Value | Comment |
|---|---|---|---|
Melt volume-flow rate | 8 cm³/10min Show Material materials with Melt volume-flow rate of 8 cm³/10min | ISO 1133 | 300°C/1.2 kg | |
Shrinkage | 23.0 °C | 0.77 % Show Material materials with Shrinkage of 0.77 % | SABIC method |
Shrinkage, transverse | 23.0 °C | 0.77 % Show Material materials with Shrinkage, transverse of 0.77 % | SABIC method |
Technological properties
| Property | ||
|---|---|---|
| Application areas | Sunglasses | |
| Processing methods | Drying Temperature: 120°C, Drying Time: 2-4hrs, Maximum Moisture Content: 0.02%, Melt Temperature: 280-310°C, Nozzle Temperature: 270-290°C, Front - Zone 3 Temperature: 280-310°C, Middle - Zone 2 Temperature: 270-290°C, Rear - Zone 1 Temperature: 260-280°C, Hopper Temperature: 60-80°C, Mold Temperature: 80-110°C | |