LEXAN™ Resin OQ4320R

Want to keep this datasheet? Save it now in your required format

Description

Optical grade with UV cut-off up to 400 nm; greater optical purity than standard grades. For sunglass and sunvisor markets. Internal mold release.

This material data has been provided by Matmatch.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

Properties

General

PropertyTemperatureValueComment

Density

23.0 °C

1.2 g/cm³

Show Material materials with Density of 1.2 g/cm³

ASTM D 792

Water absorption

23.0 °C

0.15 %

Show Material materials with Water absorption of 0.15 %

ASTM D 570 | 24 Hours

Mechanical

PropertyTemperatureValueComment

Elongation

23.0 °C

130 %

Show Material materials with Elongation of 130 %

ASTM D 638 | Type I, 50 mm/min

Elongation at yield

23.0 °C

7 %

Show Material materials with Elongation at yield of 7 %

ASTM D 638 | Type I, 50 mm/min

Flexural modulus

23.0 °C

2.34 GPa

Show Material materials with Flexural modulus of 2.34 GPa

ASTM D 790 | 1.3 mm/min, 50 mm span

Flexural yield strength

23.0 °C

96 MPa

Show Material materials with Flexural yield strength of 96 MPa

ASTM D 790 | 1.3 mm/min, 50 mm span

Impact strength, Izod notched, ASTM

23.0 °C

747 J/m

Show Material materials with Impact strength, Izod notched, ASTM of 747 J/m

ASTM D 256

Yield strength

23.0 °C

62 MPa

Show Material materials with Yield strength of 62 MPa

ASTM D 638 | Type I, 50 mm/min

Thermal

PropertyValueComment

Heat deflection temperature, 1.80 MPa

132 °C

Show Material materials with Heat deflection temperature, 1.80 MPa of 132 °C

ASTM D 648 | 1.82 MPa, 6.4 mm, unannealed

Vicat softening temperature

154 °C

Show Material materials with Vicat softening temperature of 154 °C

ASTM D 1525 | Rate B/50

Rheological Properties

PropertyTemperatureValueComment

Melt mass-flow rate

12.5 g/10min

Show Material materials with Melt mass-flow rate of 12.5 g/10min

ASTM D 1238 | 300°C/1.2 kg

Shrinkage

23.0 °C

0.5 - 0.7 %

Show Material materials with Shrinkage of 0.5 - 0.7 %

SABIC method | 3.2 mm

Technological properties

Property
Application areas

Safety Glasses