SABIC® HDPE P5510

Want to keep this datasheet? Save it now in your required format

Description

SABIC® HDPE 5510 10000 (black) is a grade, which has a high density (class MRS 8 - PE 80) and a bimodal distribution of the molecular mass. An universal grade for pipe extrusion which, due to a keen combination of properties, is particularly suitable for drinking water and waste water piping. It is also used for the manufacture of chemical apparatus and containers. This material meets (inter)national standards for use in drinking water and wastewater piping.

This material data has been provided by Matmatch.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Properties

General

Property	Temperature	Value	Comment
Density	23.0 °C	0.96 g/cm³ Show Material materials with Density of 0.96 g/cm³	ASTM D1505

Mechanical

Property	Temperature	Value	Comment
Elastic modulus	23.0 °C	0.85 GPa Show Material materials with Elastic modulus of 0.85 GPa	ASTM D638
Elongation at yield	23.0 °C	8 % Show Material materials with Elongation at yield of 8 %	ISO 527-1/-2
Hardness, Shore D	23.0 °C	59 [-] Show Material materials with Hardness, Shore D of 59 [-]	ISO 868
Impact strength, Charpy notched	-30.0 °C	8 kJ/m² Show Material materials with Impact strength, Charpy notched of 8 kJ/m²	ISO 179
	23.0 °C	24 kJ/m² Show Material materials with Impact strength, Charpy notched of 24 kJ/m²	ISO 179

Yield strength	23.0 °C	22 MPa Show Material materials with Yield strength of 22 MPa	ISO 527-1/-2

Thermal

Property	Value	Comment
Vicat softening temperature	70 °C Show Material materials with Vicat softening temperature of 70 °C	ISO 306 \| 50 N (VST/B)

Technological properties

Property
Application areas	It is used for pipe extrusion while it is particularly suitable for drinking water and waste water piping. Also used for chemical apparatus and containers.

SABIC® HDPE P5510

Description

Ashby charts

Suggested reading

Properties