General
Property | Temperature | Value | Comment |
---|---|---|---|
Density | 23.0 °C | 1.23 g/cm³ Show Material materials with Density of 1.23 g/cm³ | ASTM D 792 |
Mechanical
Property | Temperature | Value | Comment |
---|---|---|---|
Elongation | 23.0 °C | 200 % Show Material materials with Elongation of 200 % | SABIC - Japan Method |
Flexural modulus | 23.0 °C | 2.15 GPa Show Material materials with Flexural modulus of 2.15 GPa | ASTM D 790 |
Flexural strength | 23.0 °C | 82 MPa Show Material materials with Flexural strength of 82 MPa | ASTM D 790 |
Impact strength, Izod notched, ASTM | -30.0 °C | 50 J/m Show Material materials with Impact strength, Izod notched, ASTM of 50 J/m | ASTM D 256 |
23.0 °C | 392 J/m Show Material materials with Impact strength, Izod notched, ASTM of 392 J/m | ASTM D 256 | |
Yield strength | 23.0 °C | 52 MPa Show Material materials with Yield strength of 52 MPa | SABIC - Japan Method |
Thermal
Property | Temperature | Value | Comment |
---|---|---|---|
Coefficient of thermal expansion | 23.0 °C | 6E-5 1/K Show Material materials with Coefficient of thermal expansion of 6E-5 1/K | TMA | -30°C to 30°C |
Heat deflection temperature, 1.80 MPa | 130 °C Show Material materials with Heat deflection temperature, 1.80 MPa of 130 °C | ASTM D 648 | 1.82 MPa, 3.2mm, unannealed |
Rheological Properties
Property | Temperature | Value | Comment |
---|---|---|---|
Shrinkage | 23.0 °C | 0.5 - 0.8 % Show Material materials with Shrinkage of 0.5 - 0.8 % | SABIC method | 3.2 mm |
Technological properties
Property | ||
---|---|---|
Application areas | Displays,Document Handling,Door Handle,Electronic Components,Exterior,Front Grille,Rear/Signal Lighting,Recreational Vehicle,Security/Detection |