CYCOLAC™ Resin X11

Want to keep this datasheet? Save it now in your required format

Description

Automotive: High heat resistance. Excellent flow/impact balance. High gloss.

This material data has been provided by Matmatch.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyTemperatureValueComment

Density

23.0 °C

1.04 g/cm³

Show Material materials with Density of 1.04 g/cm³

ASTM D 792

Mechanical

PropertyTemperatureValueComment

Elastic modulus

23.0 °C

2.37 GPa

Show Material materials with Elastic modulus of 2.37 GPa

ASTM D 638 | 5 mm/min

Elongation

23.0 °C

27 %

Show Material materials with Elongation of 27 %

ASTM D 638 | Type I, 5 mm/min

Elongation at yield

23.0 °C

2.6 %

Show Material materials with Elongation at yield of 2.6 %

ASTM D 638 | Type I, 5 mm/min

Flexural modulus

23.0 °C

2.17 GPa

Show Material materials with Flexural modulus of 2.17 GPa

ISO 178 | 2 mm/min

Flexural yield strength

23.0 °C

69 MPa

Show Material materials with Flexural yield strength of 69 MPa

ISO 178 | 2 mm/min

Hardness, Rockwell R

23.0 °C

104 [-]

Show Material materials with Hardness, Rockwell R of 104 [-]

ASTM D 785

Impact strength, Charpy notched

-30.0 °C

11 kJ/m²

Show Material materials with Impact strength, Charpy notched of 11 kJ/m²

ISO 179/1eA

23.0 °C

25 kJ/m²

Show Material materials with Impact strength, Charpy notched of 25 kJ/m²

ISO 179/1eA

Impact strength, Izod notched

-40.0 °C

9 kJ/m²

Show Material materials with Impact strength, Izod notched of 9 kJ/m²

ISO 180/1A

-30.0 °C

10 kJ/m²

Show Material materials with Impact strength, Izod notched of 10 kJ/m²

ISO 180/1A

23.0 °C

25 kJ/m²

Show Material materials with Impact strength, Izod notched of 25 kJ/m²

ISO 180/1A

Unlock all property charts

Impact strength, Izod notched, ASTM

23.0 °C

240 - 300 J/m

Show Material materials with Impact strength, Izod notched, ASTM of 240 - 300 J/m

ASTM D 256

Tensile strength

23.0 °C

33 MPa

Show Material materials with Tensile strength of 33 MPa

ASTM D 638 | Type I, 5 mm/min

Yield strength

23.0 °C

42 MPa

Show Material materials with Yield strength of 42 MPa

ASTM D 638 | Type I, 5 mm/min

Thermal

PropertyValueComment

Heat deflection temperature, 1.80 MPa

93 °C

Show Material materials with Heat deflection temperature, 1.80 MPa of 93 °C

ASTM D 648 | 1.82 MPa, 6.4 mm, unannealed

Relative temperature index, electrical

60 °C

Show Material materials with Relative temperature index, electrical of 60 °C

UL 746B

Relative temperature index, mechanical impact

60 °C

Show Material materials with Relative temperature index, mechanical impact of 60 °C

UL 746B

Relative temperature index, mechanical strength

60 °C

Show Material materials with Relative temperature index, mechanical strength of 60 °C

UL 746B

Vicat softening temperature

106 °C

Show Material materials with Vicat softening temperature of 106 °C

ISO 306 | Rate B/120

Flammability

UL Recognized, 94HB Flame Class Rating | 1.5mm | UL 94

Rheological Properties

PropertyTemperatureValueComment

Melt mass-flow rate

10 g/10min

Show Material materials with Melt mass-flow rate of 10 g/10min

ISO 1133 | 220°C/10.0 kg

Shrinkage

23.0 °C

0.5 - 0.8 %

Show Material materials with Shrinkage of 0.5 - 0.8 %

SABIC method | 3.2 mm

Technological properties

Property
Application areas

Air Cabin Interiors,Applique,Auto Aftermarket,Cladding,Cluster,Console,Cowl Vent Grille,Doors Hardware/Trim,Electronic Components,Enclosures,Exterior Mirror,Exterior Trim,Food Processor,Front Grille,Glove Box,Infotainment/Telematic,Interior,Overhead,Rear/Signal Lighting,Recreational Vehicle,Seat,Spoiler,Surgical Devices,Trim

Processing methods

Drying Temperature: 90-95°C, Drying Time: 2-4hrs, Drying Time (Cumulative): 8hrs, Maximum Moisture Content: 0.1%, Melt Temperature: 230-275°C, Nozzle Temperature: 230-275°C, Front - Zone 3 Temperature: 230-255°C, Middle - Zone 2 Temperature: 210-225°C, Rear - Zone 1 Temperature: 195-210°C, Mold Temperature: 50-80°C, Back Pressure: 0.3-0.7MPa, Screw Speed: 30-60rpm, Shot to Cylinder Size: 50-70%, Vent Depth: 0.038-0.051mm