Properties
General
| Property | Temperature | Value | Comment |
|---|---|---|---|
Density | 23.0 °C | 1.27 g/cm³ Show Material materials with Density of 1.27 g/cm³ | ASTM D 792 |
Water absorption | 23.0 °C | 0.14 % Show Material materials with Water absorption of 0.14 % | ISO 62 | 23°C, 50% RH |
Mechanical
| Property | Temperature | Value | Comment | ||
|---|---|---|---|---|---|
Elastic modulus | 23.0 °C | 3.4 GPa Show Material materials with Elastic modulus of 3.4 GPa | ASTM D 638 | 5 mm/min | ||
Elongation | 23.0 °C | 150 % Show Material materials with Elongation of 150 % | ASTM D 638 | Type I, 5 mm/min | ||
Elongation at yield | 23.0 °C | 4.5 % Show Material materials with Elongation at yield of 4.5 % | ASTM D 638 | Type I, 5 mm/min | ||
Flexural modulus | 23.0 °C | 2.9 GPa Show Material materials with Flexural modulus of 2.9 GPa | ISO 178 | 2 mm/min | ||
Flexural yield strength | 23.0 °C | 90 MPa Show Material materials with Flexural yield strength of 90 MPa | ISO 178 | 2 mm/min | ||
Hardness, Ball Indentation | 23.0 °C | 105 MPa Show Material materials with Hardness, Ball Indentation of 105 MPa | ISO 2039-1 | ||
Impact strength, Charpy notched | -30.0 °C | 12 kJ/m² Show Material materials with Impact strength, Charpy notched of 12 kJ/m² | ISO 179/1eA | ||
23.0 °C | 40 kJ/m² Show Material materials with Impact strength, Charpy notched of 40 kJ/m² | ISO 179/1eA | |||
Impact strength, Izod notched | -30.0 °C | 9 kJ/m² Show Material materials with Impact strength, Izod notched of 9 kJ/m² | ISO 180/1A | ||
23.0 °C | 15 - 45 kJ/m² Show Material materials with Impact strength, Izod notched of 15 - 45 kJ/m² | ISO 180/1A | |||
Impact strength, Izod notched, ASTM | -30.0 °C | 120 J/m Show Material materials with Impact strength, Izod notched, ASTM of 120 J/m | ASTM D 256 | ||
23.0 °C | 600 J/m Show Material materials with Impact strength, Izod notched, ASTM of 600 J/m | ASTM D 256 | |||
Tensile strength | 23.0 °C | 60 MPa Show Material materials with Tensile strength of 60 MPa | ASTM D 638 | Type I, 5 mm/min | ||
Yield strength | 23.0 °C | 56 MPa Show Material materials with Yield strength of 56 MPa | ASTM D 638 | Type I, 5 mm/min | ||
Impact strength, Charpy unnotched | No break @ 23,-30°C | ISO 179/1eU | ||||
Impact strength, Izod unnotched | No break @ 23,-30°C | ISO 180/1U | ||||
Thermal
| Property | Temperature | Value | Comment |
|---|---|---|---|
Coefficient of thermal expansion | 23.0 °C | 6E-5 1/K Show Material materials with Coefficient of thermal expansion of 6E-5 1/K | ASTM E 831 | -40°C to 40°C |
Coefficient of thermal expansion, transverse | 23.0 °C | 8.2E-5 1/K Show Material materials with Coefficient of thermal expansion, transverse of 8.2E-5 1/K | ASTM E 831 | -40°C to 40°C |
Heat deflection temperature, 0.45 MPa | 119 °C Show Material materials with Heat deflection temperature, 0.45 MPa of 119 °C | ISO 75/Bf | 0.45 MPa | |
Thermal conductivity | 23.0 °C | 0.2 W/(m·K) Show Material materials with Thermal conductivity of 0.2 W/(m·K) | ISO 8302 |
Vicat softening temperature | 133 °C Show Material materials with Vicat softening temperature of 133 °C | ASTM D 1525 | Rate B/50 |
Rheological Properties
| Property | Temperature | Value | Comment |
|---|---|---|---|
Melt mass-flow rate | 7 g/10min Show Material materials with Melt mass-flow rate of 7 g/10min | ASTM D 1238 | 266°C/5.0 kg | |
Melt volume-flow rate | 6 cm³/10min Show Material materials with Melt volume-flow rate of 6 cm³/10min | ISO 1133 | 265°C/5.0 kg | |
Shrinkage | 23.0 °C | 0.7 - 0.9 % Show Material materials with Shrinkage of 0.7 - 0.9 % | SABIC method | 3.2 mm |
Technological properties
| Property | ||
|---|---|---|
| Application areas | Auto Aftermarket,Exterior Trim | |
| Processing methods | Drying Temperature: 90-100°C, Drying Time: 2-4hrs, Maximum Moisture Content: 0.02%, Melt Temperature: 255-270°C, Nozzle Temperature: 250-265°C, Front - Zone 3 Temperature: 250-270°C, Middle - Zone 2 Temperature: 240-265°C, Rear - Zone 1 Temperature: 230-250°C, Hopper Temperature: 40-60°C, Mold Temperature: 60-80°C | |