General
Property | Temperature | Value | Comment |
---|---|---|---|
Density | 23.0 °C | 1.22 g/cm³ Show Material materials with Density of 1.22 g/cm³ | ASTM D 792 |
Water absorption | 23.0 °C | 0.2 % Show Material materials with Water absorption of 0.2 % | ASTM D 570 | 50% RH, equilib |
Water absorption, equilibrium | 23.0 °C | 0.7 % Show Material materials with Water absorption, equilibrium of 0.7 % | ASTM D 570 |
Mechanical
Property | Temperature | Value | Comment | ||
---|---|---|---|---|---|
Elastic modulus | 23.0 °C | 2.09 GPa Show Material materials with Elastic modulus of 2.09 GPa | ASTM D 638 | 50 mm/min | ||
Elongation | 23.0 °C | 110 % Show Material materials with Elongation of 110 % | ASTM D 638 | Type I, 50 mm/min | ||
Elongation at yield | 23.0 °C | 5 % Show Material materials with Elongation at yield of 5 % | ASTM D 638 | Type I, 50 mm/min | ||
Flexural modulus | 23.0 °C | 2.2 GPa Show Material materials with Flexural modulus of 2.2 GPa | ISO 178 | 2 mm/min | ||
Flexural yield strength | 23.0 °C | 80 MPa Show Material materials with Flexural yield strength of 80 MPa | ISO 178 | 2 mm/min | ||
Impact strength, Charpy notched | -30.0 °C | 35 kJ/m² Show Material materials with Impact strength, Charpy notched of 35 kJ/m² | ISO 179/1eA | ||
23.0 °C | 45 kJ/m² Show Material materials with Impact strength, Charpy notched of 45 kJ/m² | ISO 179/1eA | |||
Impact strength, Izod notched | -40.0 °C | 15 kJ/m² Show Material materials with Impact strength, Izod notched of 15 kJ/m² | ISO 180/1A | ||
-30.0 °C | 25 kJ/m² Show Material materials with Impact strength, Izod notched of 25 kJ/m² | ISO 180/1A | |||
-20.0 °C | 35 kJ/m² Show Material materials with Impact strength, Izod notched of 35 kJ/m² | ISO 180/1A | |||
-10.0 °C | 38 kJ/m² Show Material materials with Impact strength, Izod notched of 38 kJ/m² | ISO 180/1A | |||
23.0 °C | 40 kJ/m² Show Material materials with Impact strength, Izod notched of 40 kJ/m² | ISO 180/1A | |||
Impact strength, Izod notched, ASTM | -40.0 °C | 224 J/m Show Material materials with Impact strength, Izod notched, ASTM of 224 J/m | ASTM D 256 | ||
-30.0 °C | 245 J/m Show Material materials with Impact strength, Izod notched, ASTM of 245 J/m | ASTM D 256 | |||
-20.0 °C | 598 J/m Show Material materials with Impact strength, Izod notched, ASTM of 598 J/m | ASTM D 256 | |||
23.0 °C | 699 J/m Show Material materials with Impact strength, Izod notched, ASTM of 699 J/m | ASTM D 256 | |||
Poisson's ratio | 23.0 °C | 0.4 [-] Show Material materials with Poisson's ratio of 0.4 [-] | ASTM E 132 | ||
Tensile strength | 23.0 °C | 49 MPa Show Material materials with Tensile strength of 49 MPa | ASTM D 638 | Type I, 50 mm/min | ||
Yield strength | 23.0 °C | 49 MPa Show Material materials with Yield strength of 49 MPa | ASTM D 638 | Type I, 50 mm/min | ||
Impact strength, Charpy unnotched | No break @ 23,-30°C | ISO 179/1eU | ||||
Impact strength, Izod unnotched | No break @ 23,-30°C | ISO 180/1U |
Thermal
Property | Temperature | Value | Comment |
---|---|---|---|
Coefficient of thermal expansion | 23.0 °C | 7.56E-5 1/K Show Material materials with Coefficient of thermal expansion of 7.56E-5 1/K | ASTM D 696 | -30°C to 30°C |
Coefficient of thermal expansion, transverse | 23.0 °C | 7.92E-5 1/K Show Material materials with Coefficient of thermal expansion, transverse of 7.92E-5 1/K | ASTM D 696 | -30°C to 30°C |
Heat deflection temperature, 1.80 MPa | 105 °C Show Material materials with Heat deflection temperature, 1.80 MPa of 105 °C | ISO 75/Ae | 1.8 MPa | |
Thermal conductivity | 23.0 °C | 0.18 W/(m·K) Show Material materials with Thermal conductivity of 0.18 W/(m·K) | ASTM C177 |
Vicat softening temperature | 135 °C Show Material materials with Vicat softening temperature of 135 °C | ISO 306 | Rate B/120 |
Electrical
Property | Temperature | Value | Comment |
---|---|---|---|
Dielectric constant | 23.0 °C | 3.1 [-] Show Material materials with Dielectric constant of 3.1 [-] | ASTM D 150 | at 1 MHz |
Dielectric strength | 23.0 °C | 16.9 kV/mm Show Material materials with Dielectric strength of 16.9 kV/mm | ASTM D 149 | in oil, 3.2 mm |
Dissipation factor | 23.0 °C | 0.02 [-] Show Material materials with Dissipation factor of 0.02 [-] | ASTM D 150 | at 1 MHz |
Rheological Properties
Property | Temperature | Value | Comment |
---|---|---|---|
Melt volume-flow rate | 4 cm³/10min Show Material materials with Melt volume-flow rate of 4 cm³/10min | ISO 1133 | 265°C/1.2 kg | |
Shrinkage | 23.0 °C | 0.5 - 0.8 % Show Material materials with Shrinkage of 0.5 - 0.8 % | SABIC method |
Shrinkage, transverse | 23.0 °C | 0.5 - 0.8 % Show Material materials with Shrinkage, transverse of 0.5 - 0.8 % | SABIC method |
Technological properties
Property | ||
---|---|---|
Application areas | Door Handle,Wiring Devices | |
Processing methods | Drying Temperature: 110°C, Drying Time: 4-6hrs, Drying Time (Cumulative): 8hrs, Maximum Moisture Content: 0.02%, Melt Temperature: 260-275°C, Nozzle Temperature: 255-270°C, Front - Zone 3 Temperature: 255-275°C, Middle - Zone 2 Temperature: 250-270°C, Rear - Zone 1 Temperature: 245-265°C, Mold Temperature: 65-90°C, Back Pressure: 0.3-0.7MPa, Screw Speed: 50-80rpm, Shot to Cylinder Size: 50-80%, Vent Depth: 0.013-0.02mm |