GELOY™ Resin XP4034

Want to keep this datasheet? Save it now in your required format

Description

PC/ASA. Excellent weatherability.

This material data has been provided by Matmatch.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Properties

General

Property	Temperature	Value	Comment
Density	23.0 °C	1.15 g/cm³ Show Material materials with Density of 1.15 g/cm³	ISO 1183
Water absorption	23.0 °C	0.25 % Show Material materials with Water absorption of 0.25 %	ISO 62 \| 23°C, 50% RH

Mechanical

Property	Temperature	Value	Comment
Elastic modulus	23.0 °C	2.4 GPa Show Material materials with Elastic modulus of 2.4 GPa	ISO 527 \| 1 mm/min
Elongation	23.0 °C	35 % Show Material materials with Elongation of 35 %	ISO 527 \| 50 mm/min
Elongation at yield	23.0 °C	4.5 % Show Material materials with Elongation at yield of 4.5 %	ISO 527 \| 50 mm/min
Flexural modulus	23.0 °C	2.5 GPa Show Material materials with Flexural modulus of 2.5 GPa	ISO 178 \| 2 mm/min
Flexural yield strength	23.0 °C	80 MPa Show Material materials with Flexural yield strength of 80 MPa	ISO 178 \| 2 mm/min
Hardness, Ball Indentation	23.0 °C	98 MPa Show Material materials with Hardness, Ball Indentation of 98 MPa	ISO 2039-1
Impact strength, Izod notched	-30.0 °C	8 kJ/m² Show Material materials with Impact strength, Izod notched of 8 kJ/m²	ISO 180/1A
	23.0 °C	33 kJ/m² Show Material materials with Impact strength, Izod notched of 33 kJ/m²	ISO 180/1A

Tensile strength	23.0 °C	50 MPa Show Material materials with Tensile strength of 50 MPa	ISO 527 \| 50 mm/min
Yield strength	23.0 °C	57 MPa Show Material materials with Yield strength of 57 MPa	ISO 527 \| 50 mm/min

Thermal

Property	Value	Comment
Heat deflection temperature, 1.80 MPa	100 °C Show Material materials with Heat deflection temperature, 1.80 MPa of 100 °C	ISO 75/Ae \| 1.8 MPa
Vicat softening temperature	109 °C Show Material materials with Vicat softening temperature of 109 °C	ISO 306 \| Rate B/120

Rheological Properties

Property	Temperature	Value	Comment
Melt volume-flow rate		15 cm³/10min Show Material materials with Melt volume-flow rate of 15 cm³/10min	ISO 1133 \| 260°C/5.0 kg
Shrinkage	23.0 °C	0.4 - 0.6 % Show Material materials with Shrinkage of 0.4 - 0.6 %	SABIC method

Technological properties

Property
Application areas	Applique,Audio,Auto Aftermarket,Building Element,Cluster,Cowl Vent Grille,Data Management,Data Transfer,Document Handling,Door Handle,Doors Hardware/Trim,Electronic Components,Enclosure/Housing/Cover,Enclosures,Energy Management,EV Infrastructure,Exercise Equipment,Exterior Mirror,Exterior Trim,Exterior,Food Processor,Forward Lighting,Front Grille,Glove Box,Heavy Vehicles,Infotainment/Telematic,Interior,Lighting,Non-LED Lighting,Overhead,Personal Computing,Rear/Signal Lighting,Recreational Vehicle,Seat,Security/Detection,Spoiler,Trim,Wireless Communications
Processing methods	Drying Temperature: 90-105°C, Drying Time: 2-4hrs, Maximum Moisture Content: 0.04%, Melt Temperature: 260-275°C, Mold Temperature: 50-70°C

GELOY™ Resin XP4034

Description

Ashby charts

Suggested reading

Properties