GELOY™ Resin XTPMFR10

Want to keep this datasheet? Save it now in your required format

Description

PC/ASA, chlorine and bromine free.

This material data has been provided by Matmatch.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyTemperatureValueComment

Density

23.0 °C

1.18 g/cm³

Show Material materials with Density of 1.18 g/cm³

ISO 1183

Mechanical

PropertyTemperatureValueComment

Elastic modulus

23.0 °C

2.68 GPa

Show Material materials with Elastic modulus of 2.68 GPa

ASTM D 638 | 50 mm/min

Elongation

23.0 °C

58 %

Show Material materials with Elongation of 58 %

ASTM D 638 | Type I, 5 mm/min

Elongation at yield

23.0 °C

4 %

Show Material materials with Elongation at yield of 4 %

ASTM D 638 | Type I, 5 mm/min

Flexural modulus

23.0 °C

2.72 GPa

Show Material materials with Flexural modulus of 2.72 GPa

ISO 178 | 2 mm/min

Flexural yield strength

23.0 °C

97 MPa

Show Material materials with Flexural yield strength of 97 MPa

ISO 178 | 2 mm/min

Impact strength, Charpy notched

23.0 °C

13 kJ/m²

Show Material materials with Impact strength, Charpy notched of 13 kJ/m²

ISO 179/1eA

Impact strength, Izod notched

23.0 °C

12 - 13 kJ/m²

Show Material materials with Impact strength, Izod notched of 12 - 13 kJ/m²

ISO 180/1A

Impact strength, Izod notched, ASTM

-30.0 °C

90 J/m

Show Material materials with Impact strength, Izod notched, ASTM of 90 J/m

ASTM D 256

23.0 °C

330 J/m

Show Material materials with Impact strength, Izod notched, ASTM of 330 J/m

ASTM D 256

Tensile strength

23.0 °C

49 MPa

Show Material materials with Tensile strength of 49 MPa

ASTM D 638 | Type I, 5 mm/min

Yield strength

23.0 °C

60 MPa

Show Material materials with Yield strength of 60 MPa

ASTM D 638 | Type I, 5 mm/min

Thermal

PropertyTemperatureValueComment

Coefficient of thermal expansion

23.0 °C

6.3E-5 1/K

Show Material materials with Coefficient of thermal expansion of 6.3E-5 1/K

ISO 11359-2 | -40°C to 40°C

Coefficient of thermal expansion, transverse

23.0 °C

6.3E-5 1/K

Show Material materials with Coefficient of thermal expansion, transverse of 6.3E-5 1/K

ISO 11359-2 | -40°C to 40°C

Heat deflection temperature, 0.45 MPa

90 °C

Show Material materials with Heat deflection temperature, 0.45 MPa of 90 °C

ISO 75/Bf | 0.45 MPa

Vicat softening temperature

98 °C

Show Material materials with Vicat softening temperature of 98 °C

ISO 306 | Rate B/120

Flammability

UL Compliant, 94V-0 Flame Class Rating | 1mm | UL 94 by SABIC-IP

Rheological Properties

PropertyTemperatureValueComment

Melt viscosity

260.0 °C

105 Pa·s

Show Material materials with Melt viscosity of 105 Pa·s

ISO 11443 | 1500 sec⁻¹

Melt volume-flow rate

30 cm³/10min

Show Material materials with Melt volume-flow rate of 30 cm³/10min

ISO 1133 | 260°C/2.16 kg

Technological properties

Property
Application areas

Building Accessory,Cladding/Roof,Data Transfer,Dishwasher,Enclosure/Housing/Cover,Enclosures,Heavy Vehicles,Medical Device,Wireless Communications

Processing methods

Drying Temperature: 80-90°C, Drying Time: 2-4hrs, Maximum Moisture Content: 0.02%, Melt Temperature: 230-270°C, Nozzle Temperature: 220-260°C, Front - Zone 3 Temperature: 230-270°C, Middle - Zone 2 Temperature: 220-260°C, Rear - Zone 1 Temperature: 200-230°C, Hopper Temperature: 60-80°C, Mold Temperature: 50-70°C