GELOY™ Resin XTWE480

Want to keep this datasheet? Save it now in your required format

Description

Anti-scratch GELOY grade with excellent weatherability, high flow, and good surface quality. XTWE480 is available in various colours.

This material data has been provided by Matmatch.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyTemperatureValueComment

Density

23.0 °C

1.15 g/cm³

Show Material materials with Density of 1.15 g/cm³

ASTM D 792

Mechanical

PropertyTemperatureValueComment

Elastic modulus

23.0 °C

2.47 GPa

Show Material materials with Elastic modulus of 2.47 GPa

ASTM D 638 | 50 mm/min

Elongation

23.0 °C

21 %

Show Material materials with Elongation of 21 %

ASTM D 638 | Type I, 50 mm/min

Elongation at yield

23.0 °C

3 %

Show Material materials with Elongation at yield of 3 %

ASTM D 638 | Type I, 50 mm/min

Flexural modulus

23.0 °C

2.41 GPa

Show Material materials with Flexural modulus of 2.41 GPa

ISO 178 | 2 mm/min

Flexural yield strength

23.0 °C

70 MPa

Show Material materials with Flexural yield strength of 70 MPa

ISO 178 | 2 mm/min

Impact strength, Izod notched

-30.0 °C

3 kJ/m²

Show Material materials with Impact strength, Izod notched of 3 kJ/m²

ISO 180/1A

23.0 °C

5 kJ/m²

Show Material materials with Impact strength, Izod notched of 5 kJ/m²

ISO 180/1A

Impact strength, Izod notched, ASTM

-30.0 °C

27 J/m

Show Material materials with Impact strength, Izod notched, ASTM of 27 J/m

ASTM D 256

23.0 °C

49 J/m

Show Material materials with Impact strength, Izod notched, ASTM of 49 J/m

ASTM D 256

Unlock all property charts

Tensile strength

23.0 °C

36 MPa

Show Material materials with Tensile strength of 36 MPa

ASTM D 638 | Type I, 50 mm/min

Yield strength

23.0 °C

50 MPa

Show Material materials with Yield strength of 50 MPa

ASTM D 638 | Type I, 50 mm/min

Thermal

PropertyTemperatureValueComment

Coefficient of thermal expansion

23.0 °C

8.1E-5 1/K

Show Material materials with Coefficient of thermal expansion of 8.1E-5 1/K

ISO 11359-2 | -40°C to 40°C

Coefficient of thermal expansion, transverse

23.0 °C

8.8E-5 1/K

Show Material materials with Coefficient of thermal expansion, transverse of 8.8E-5 1/K

ISO 11359-2 | -40°C to 40°C

Heat deflection temperature, 1.80 MPa

73 °C

Show Material materials with Heat deflection temperature, 1.80 MPa of 73 °C

ASTM D 648 | 1.82 MPa, 6.4 mm, unannealed

Vicat softening temperature

78 °C

Show Material materials with Vicat softening temperature of 78 °C

ASTM D 1525 | Rate B/50

Rheological Properties

PropertyTemperatureValueComment

Melt mass-flow rate

38 g/10min

Show Material materials with Melt mass-flow rate of 38 g/10min

ASTM D 1238 | 220°C/10 kg

Shrinkage

23.0 °C

0.3 - 0.6 %

Show Material materials with Shrinkage of 0.3 - 0.6 %

SABIC method | 3.2 mm

Technological properties

Property
Application areas

Cladding/Roof,Photovoltaic Components,Window

Processing methods

Drying Temperature: 75-85°C, Drying Time: 4hrs, Maximum Moisture Content: 0.02%, Melt Temperature: 200-230°C, Barrel - Zone 1 Temperature: 205-220°C, Barrel - Zone 2 Temperature: 210-225°C, Barrel - Zone 3 Temperature: 215-225°C, Barrel - Zone 4 Temperature: 215-225°C, Hopper Temperature: 60-80°C, Adapter Temperature: 200-225°C, Die Temperature: 210-225°C