General
Property | Temperature | Value | Comment |
---|---|---|---|
Density | 23.0 °C | 1.49 g/cm³ Show Material materials with Density of 1.49 g/cm³ | ISO 1183 |
Mechanical
Property | Temperature | Value | Comment |
---|---|---|---|
Elastic modulus | 23.0 °C | 5.7 GPa Show Material materials with Elastic modulus of 5.7 GPa | ISO 527-1/-2 |
Elongation | 23.0 °C | 2.8 % Show Material materials with Elongation of 2.8 % | ISO 527-1/-2 |
Impact strength, Charpy notched | -6.0 °C | 5 kJ/m² Show Material materials with Impact strength, Charpy notched of 5 kJ/m² | ISO 179/1eA |
23.0 °C | 5.1 kJ/m² Show Material materials with Impact strength, Charpy notched of 5.1 kJ/m² | ISO 179/1eA | |
Impact strength, Charpy unnotched | -6.0 °C | 21.5 kJ/m² Show Material materials with Impact strength, Charpy unnotched of 21.5 kJ/m² | ISO 179/1eU |
23.0 °C | 23.1 kJ/m² Show Material materials with Impact strength, Charpy unnotched of 23.1 kJ/m² | ISO 179/1eU | |
Poisson's ratio | 23.0 °C | 0.35 [-] Show Material materials with Poisson's ratio of 0.35 [-] | |
Tensile strength | 23.0 °C | 91 MPa Show Material materials with Tensile strength of 91 MPa | ISO 527-1/-2 |
Thermal
Property | Value | Comment | |
---|---|---|---|
Heat deflection temperature, 1.80 MPa | 195 °C Show Material materials with Heat deflection temperature, 1.80 MPa of 195 °C | ISO 75-1/-2 | |
Melting point | 223 °C Show Material materials with Melting point of 223 °C | ISO 11357-1/-3 | 18°F/min | |
Relative temperature index, electrical | 130 °C Show Material materials with Relative temperature index, electrical of 130 °C | UL 746B | 120mil | |
Relative temperature index, mechanical impact | 120 °C Show Material materials with Relative temperature index, mechanical impact of 120 °C | UL 746B | 120mil | |
Relative temperature index, mechanical strength | 130 °C Show Material materials with Relative temperature index, mechanical strength of 130 °C | UL 746B | 120mil | |
Flammability | Burning Behav. at 60mil nom. thickn.: V-0 class, Thickness tested: 1.5 mm, UL recognition: yes -, Burning Behav. at thickness h: V-0 class, Thickness tested: 0.71 mm, UL recognition: yes -, FMVSS Class: DNI - |
Rheological Properties
Technological properties
Property | ||
---|---|---|
Fillers | 15% Glass Fiber | |
Processing methods | Drying Recommended: yes, Drying Temperature: 120°C, Drying Time, Dehumidified Dryer: 2-4h, Processing Moisture Content: ≤0.04%, Melt Temperature Optimum: 250°C, Min. melt temperature: 240°C, Max. melt temperature: 260°C, Mold Temperature Optimum: 80°C, Min. mold temperature: 30°C, Max. mold temperature: 130°C, Hold pressure range: ≥60MPa, Hold pressure time: 3s/mm, Back pressure: As low as possible, Ejection temperature: 170°C |