Crastin® S600F10 BK851

Want to keep this datasheet? Save it now in your required format

Description

Common features of Crastin® thermoplastic polyester resin include mechanical and physical properties such as stiffness and toughness, heat resistance, friction and wear resistance, excellent surface finishes and good colourability. Crastin® thermoplastic polyester resin has excellent electrical insulation characteristics and high arc-resistant grades are available. Many flame retardant grades have UL recognition (class V-0). Crastin® thermoplastic polyester resin typically has high chemical and heat ageing resistance. The good melt stability of Crastin® thermoplastic polyester resin normally enables the recycling of properly handled production waste.If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-24 kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed. Crastin® thermoplastic polyester resin typically is used in demanding applications in the electronics, electrical, automotive, mechanical engineering, chemical, domestic appliances and sporting goods industry.Crastin® S600F10BK851 is an unreinforced, lubricated, medium high viscosity polybutylene terephthalate resin for injection molding.

This material data has been provided by Matmatch.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Properties

General

Property	Temperature	Value	Comment
Density	23.0 °C	1.3 g/cm³ Show Material materials with Density of 1.3 g/cm³	ISO 1183

Mechanical

Property	Temperature	Value	Comment
Elastic modulus	23.0 °C	2.6 GPa Show Material materials with Elastic modulus of 2.6 GPa	ISO 527-1/-2
Elongation	23.0 °C	500 % Show Material materials with Elongation of 500 %	min. \| ISO 527-1/-2
Elongation at yield	23.0 °C	4 % Show Material materials with Elongation at yield of 4 %	ISO 527-1/-2
Flexural modulus	23.0 °C	2.4 GPa Show Material materials with Flexural modulus of 2.4 GPa	ISO 178
Flexural strength	23.0 °C	85 MPa Show Material materials with Flexural strength of 85 MPa	ISO 178
Hardness, Ball Indentation	23.0 °C	139 MPa Show Material materials with Hardness, Ball Indentation of 139 MPa	ISO 2039-1
Impact strength, Charpy notched	23.0 °C	5 kJ/m² Show Material materials with Impact strength, Charpy notched of 5 kJ/m²	ISO 179/1eA
Impact strength, Izod unnotched	23.0 °C	4 kJ/m² Show Material materials with Impact strength, Izod unnotched of 4 kJ/m²	ISO 180/1A
Poisson's ratio	23.0 °C	0.38 [-] Show Material materials with Poisson's ratio of 0.38 [-]
Yield strength	23.0 °C	57 MPa Show Material materials with Yield strength of 57 MPa	ISO 527-1/-2

Thermal

Property	Value	Comment
Heat deflection temperature, 0.45 MPa	180 °C Show Material materials with Heat deflection temperature, 0.45 MPa of 180 °C	ISO 75-1/-2 \| annealed
Heat deflection temperature, 1.80 MPa	60 °C Show Material materials with Heat deflection temperature, 1.80 MPa of 60 °C	ISO 75-1/-2 \| annealed
Melting point	225 °C Show Material materials with Melting point of 225 °C	ISO 11357-1/-3 \| 18°F/min
Relative temperature index, electrical	130 °C Show Material materials with Relative temperature index, electrical of 130 °C	UL 746B \| 240mil
Relative temperature index, mechanical impact	115 °C Show Material materials with Relative temperature index, mechanical impact of 115 °C	UL 746B \| 240mil
Relative temperature index, mechanical strength	120 °C Show Material materials with Relative temperature index, mechanical strength of 120 °C	UL 746B \| 240mil
Flammability	Burning Behav. at 60mil nom. thickn.: HB class, Thickness tested: 1.5 mm, UL recognition: yes -, Burning Behav. at thickness h: HB class, Thickness tested: 3 mm, UL recognition: yes -, Oxygen index: 21 %, Glow Wire Flammability Index, 120mil: 700 °C, FMVSS Class: SE -

Electrical

Property	Temperature	Value	Comment
Comparative tracking index	23.0 °C	375 V Show Material materials with Comparative tracking index of 375 V	IEC 60112
Dielectric constant, 100Hz	23.0 °C	3.4 [-] Show Material materials with Dielectric constant, 100Hz of 3.4 [-]	IEC 62631-2-1
Dielectric constant, 1MHz	23.0 °C	3.3 [-] Show Material materials with Dielectric constant, 1MHz of 3.3 [-]	IEC 62631-2-1
Dielectric strength	23.0 °C	39 kV/mm Show Material materials with Dielectric strength of 39 kV/mm	IEC 60243-1
Dissipation factor, 100Hz	23.0 °C	5E-4 [-] Show Material materials with Dissipation factor, 100Hz of 5E-4 [-]	IEC 62631-2-1
Dissipation factor, 1MHz	23.0 °C	0.02 [-] Show Material materials with Dissipation factor, 1MHz of 0.02 [-]	IEC 62631-2-1
Surface resistivity	23.0 °C	1.00E+14 Ω/sq Show Material materials with Surface resistivity of 1.00E+14 Ω/sq	IEC 62631-3-2
Volume resistivity	23.0 °C	1.00E+15 Ω·cm Show Material materials with Volume resistivity of 1.00E+15 Ω·cm	min. \| IEC 62631-3-1

Rheological Properties

Property	Temperature	Value	Comment
Melt mass-flow rate		11 g/10min Show Material materials with Melt mass-flow rate of 11 g/10min	ISO 1133 \| 250°C/2.16kg
Shrinkage	23.0 °C	1.9 % Show Material materials with Shrinkage of 1.9 %	ISO 294-4, 2577
Shrinkage, transverse	23.0 °C	1.9 % Show Material materials with Shrinkage, transverse of 1.9 %	ISO 294-4, 2577

Technological properties

Property
Processing methods	Drying Recommended: yes, Drying Temperature: 120°C, Drying Time, Dehumidified Dryer: 2-4h, Processing Moisture Content: ≤0.04%, Melt Temperature Optimum: 250°C, Min. melt temperature: 240°C, Max. melt temperature: 260°C, Mold Temperature Optimum: 80°C, Min. mold temperature: 30°C, Max. mold temperature: 130°C, Hold pressure range: ≥60MPa, Hold pressure time: 4s/mm, Back pressure: As low as possible, Ejection temperature: 170°C

Crastin® S600F10 BK851

Description

Ashby charts

Suggested reading

Properties