Properties
General
| Property | Temperature | Value | Comment |
|---|---|---|---|
Density | 23.0 °C | 1.31 g/cm³ Show Material materials with Density of 1.31 g/cm³ | ISO 1183 |
Mechanical
| Property | Temperature | Value | Comment |
|---|---|---|---|
Elastic modulus | 23.0 °C | 2.6 GPa Show Material materials with Elastic modulus of 2.6 GPa | ISO 527-1/-2 |
Elongation at yield | 23.0 °C | 10 % Show Material materials with Elongation at yield of 10 % | ISO 527-1/-2 |
Flexural modulus | 23.0 °C | 2.5 GPa Show Material materials with Flexural modulus of 2.5 GPa | ISO 178 |
Impact strength, Charpy notched | -40.0 °C | 2.9 kJ/m² Show Material materials with Impact strength, Charpy notched of 2.9 kJ/m² | ISO 179/1eA |
23.0 °C | 3.4 kJ/m² Show Material materials with Impact strength, Charpy notched of 3.4 kJ/m² | ISO 179/1eA | |
Impact strength, Charpy unnotched | 23.0 °C | 276 kJ/m² Show Material materials with Impact strength, Charpy unnotched of 276 kJ/m² | ISO 179/1eU |
Impact strength, Izod unnotched | -40.0 °C | 3.8 kJ/m² Show Material materials with Impact strength, Izod unnotched of 3.8 kJ/m² | ISO 180/1A |
23.0 °C | 4.2 kJ/m² Show Material materials with Impact strength, Izod unnotched of 4.2 kJ/m² | ISO 180/1A | |
Poisson's ratio | 23.0 °C | 0.38 [-] Show Material materials with Poisson's ratio of 0.38 [-] | |
Yield strength | 23.0 °C | 57 MPa Show Material materials with Yield strength of 57 MPa | ISO 527-1/-2 |
Thermal
| Property | Temperature | Value | Comment | ||
|---|---|---|---|---|---|
Coefficient of thermal expansion | 23.0 °C | 1.9E-4 1/K Show Material materials with Coefficient of thermal expansion of 1.9E-4 1/K | ISO 11359-1/-2 | 23 - 55°C | ||
Coefficient of thermal expansion, transverse | 23.0 °C | 1.8E-4 1/K Show Material materials with Coefficient of thermal expansion, transverse of 1.8E-4 1/K | ISO 11359-1/-2 | 55 - 160°C | ||
Heat deflection temperature, 0.45 MPa | 147 °C Show Material materials with Heat deflection temperature, 0.45 MPa of 147 °C | ISO 75-1/-2 | |||
Heat deflection temperature, 1.80 MPa | 65 °C Show Material materials with Heat deflection temperature, 1.80 MPa of 65 °C | ISO 75-1/-2 | annealed | |||
Melting point | 223 °C Show Material materials with Melting point of 223 °C | ISO 11357-1/-3 | 18°F/min | |||
Flammability | FMVSS Class: SE | ||||
Rheological Properties
| Property | Temperature | Value | Comment |
|---|---|---|---|
Melt mass-flow rate | 34 g/10min Show Material materials with Melt mass-flow rate of 34 g/10min | ISO 1133 | 250°C/2.16kg | |
Shrinkage | 23.0 °C | 2 % Show Material materials with Shrinkage of 2 % | ISO 294-4 | Annealed |
Shrinkage, transverse | 23.0 °C | 2 % Show Material materials with Shrinkage, transverse of 2 % | ISO 294-4 | Annealed |
Technological properties
| Property | ||
|---|---|---|
| Processing methods | Drying Recommended: yes, Drying Temperature: 120°C, Drying Time, Dehumidified Dryer: 2-4h, Processing Moisture Content: ≤0.04%, Melt Temperature Optimum: 250°C, Min. melt temperature: 240°C, Max. melt temperature: 260°C, Mold Temperature Optimum: 80°C, Min. mold temperature: 30°C, Max. mold temperature: 130°C, Hold pressure range: ≥60MPa, Hold pressure time: 4s/mm, Back pressure: As low as possible, Ejection temperature: 170°C | |