Delrin® 911PE NC010

Want to keep this datasheet? Save it now in your required format


Common features of Delrin® acetal resins include mechanical and physical properties such as high mechanical strength and rigidity, excellent fatigue and impact resistance, as well as resistance to moisture, gasoline, lubricants, solvents, and many other neutral chemicals. Delrin® acetal resins also have excellent dimensional stability and good electrical insulating characteristics. They are naturally resilient, self-lubricating, and available in a variety of colors and speciality grades. Delrin® acetal resin typically is used in demanding applications in the automotive, domestic appliances, sports, industrial engineering, electronics, and consumer goods industries.Delrin® 911PE is a low viscosity acetal homopolymer with enhanced crystallization for faster cycle times and excellent creep and fatigue resistance. It has improved thermal stability, excellent dimensional stability, low warpage, fewer voids, and extremely low emission.

This material data has been provided by Matmatch.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.





23.0 °C

1.42 g/cm³

Show Material materials with Density of 1.42 g/cm³

ISO 1183



Elastic modulus

23.0 °C

3.4 GPa

Show Material materials with Elastic modulus of 3.4 GPa

ISO 527-1/-2

Elongation at yield

23.0 °C

10 %

Show Material materials with Elongation at yield of 10 %

ISO 527-1/-2

Flexural modulus

23.0 °C

3.1 GPa

Show Material materials with Flexural modulus of 3.1 GPa

ISO 178

Impact strength, Charpy notched

23.0 °C

4 kJ/m²

Show Material materials with Impact strength, Charpy notched of 4 kJ/m²

ISO 179/1eA

Poisson's ratio

23.0 °C

0.37 [-]

Show Material materials with Poisson's ratio of 0.37 [-]

Yield strength

23.0 °C

72 MPa

Show Material materials with Yield strength of 72 MPa

ISO 527-1/-2



Heat deflection temperature, 1.80 MPa

104 °C

Show Material materials with Heat deflection temperature, 1.80 MPa of 104 °C

ISO 75-1/-2

Melting point

178 °C

Show Material materials with Melting point of 178 °C

ISO 11357-1/-3 | 18°F/min

Rheological Properties


Melt mass-flow rate

22 g/10min

Show Material materials with Melt mass-flow rate of 22 g/10min

ISO 1133 | 190°C/2.16kg

Melt volume-flow rate

19 cm³/10min

Show Material materials with Melt volume-flow rate of 19 cm³/10min

ISO 1133


23.0 °C

2 %

Show Material materials with Shrinkage of 2 %

ISO 294-4, 2577

Shrinkage, transverse

23.0 °C

2 %

Show Material materials with Shrinkage, transverse of 2 %

ISO 294-4, 2577

Technological properties

Processing methods

Drying Recommended: yes, Drying Temperature: 80°C, Drying Time, Dehumidified Dryer: 2-4h, Processing Moisture Content: ≤0.2%, Melt Temperature Optimum: 215°C, Min. melt temperature: 210°C, Max. melt temperature: 220°C, Mold Temperature Optimum: 90°C, Min. mold temperature: 80°C, Max. mold temperature: 100°C, Hold pressure range: 80-100MPa, Hold pressure time: 7.5s/mm