Crastin® ST830FRUV NC010

Alternative and trade names
PBT-HIFR(17)
Want to keep this datasheet? Save it now in your required format

Description

ISO 1043: PBT-HIFR(17) Common features of Crastin® thermoplastic polyester resin include mechanical and physical properties such as stiffness and toughness, heat resistance, friction and wear resistance, excellent surface finishes and good colourability. Crastin® thermoplastic polyester resin has excellent electrical insulation characteristics and high arc-resistant grades are available. Many flame retardant grades have UL recognition (class V-0). Crastin® thermoplastic polyester resin typically has high chemical and heat ageing resistance. The good melt stability of Crastin® thermoplastic polyester resin normally enables the recycling of properly handled production waste.If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-24 kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed. Crastin® thermoplastic polyester resin typically is used in demanding applications in the electronics, electrical, automotive, mechanical engineering, chemical, domestic appliances and sporting goods industry.Crastin® ST830FRUV NC010 is an unreinforced, Super Tough, flame retardant polybutylene terephthalate resin for injection molding. It contains a UV light stabilizer and is recognized as UL94V-0 at 0.85mm (0.033in).

This material data has been provided by Matmatch.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyTemperatureValueComment

Density

23.0 °C

1.37 g/cm³

Show Material materials with Density of 1.37 g/cm³

ISO 1183

Mechanical

PropertyTemperatureValueComment

Elastic modulus

23.0 °C

2.2 GPa

Show Material materials with Elastic modulus of 2.2 GPa

ISO 527-1/-2

Elongation

23.0 °C

45 %

Show Material materials with Elongation of 45 %

ISO 527-1/-2

Elongation at yield

23.0 °C

9 %

Show Material materials with Elongation at yield of 9 %

ISO 527-1/-2

Flexural modulus

23.0 °C

2.1 GPa

Show Material materials with Flexural modulus of 2.1 GPa

ISO 178

Impact strength, Charpy notched

-40.0 °C

10 kJ/m²

Show Material materials with Impact strength, Charpy notched of 10 kJ/m²

ISO 179/1eA

-6.0 °C

10 kJ/m²

Show Material materials with Impact strength, Charpy notched of 10 kJ/m²

ISO 179/1eA

23.0 °C

65 kJ/m²

Show Material materials with Impact strength, Charpy notched of 65 kJ/m²

ISO 179/1eA

Impact strength, Charpy unnotched

-40.0 °C

350 kJ/m²

Show Material materials with Impact strength, Charpy unnotched of 350 kJ/m²

No Break @ 23°C, ISO 179/1eU

-6.0 °C

350 kJ/m²

Show Material materials with Impact strength, Charpy unnotched of 350 kJ/m²

No Break @ 23°C, ISO 179/1eU

Unlock all property charts

Impact strength, Izod notched

-40.0 °C

220 kJ/m²

Show Material materials with Impact strength, Izod notched of 220 kJ/m²

No Break @ 23°C, ISO 180/1A

-30.0 °C

220 kJ/m²

Show Material materials with Impact strength, Izod notched of 220 kJ/m²

No Break @ 23°C, ISO 180/1A

Unlock all property charts

Impact strength, Izod unnotched

-40.0 °C

10 kJ/m²

Show Material materials with Impact strength, Izod unnotched of 10 kJ/m²

ISO 180/1A

-30.0 °C

10 kJ/m²

Show Material materials with Impact strength, Izod unnotched of 10 kJ/m²

ISO 180/1A

23.0 °C

70 kJ/m²

Show Material materials with Impact strength, Izod unnotched of 70 kJ/m²

ISO 180/1A

Unlock all property charts

Poisson's ratio

23.0 °C

0.39 [-]

Show Material materials with Poisson's ratio of 0.39 [-]

Yield strength

23.0 °C

41 MPa

Show Material materials with Yield strength of 41 MPa

ISO 527-1/-2

Thermal

PropertyTemperatureValueComment

Coefficient of thermal expansion

23.0 °C

1.9E-4 1/K

Show Material materials with Coefficient of thermal expansion of 1.9E-4 1/K

ISO 11359-1/-2

Coefficient of thermal expansion, transverse

23.0 °C

1.9E-4 1/K

Show Material materials with Coefficient of thermal expansion, transverse of 1.9E-4 1/K

ISO 11359-1/-2

Heat deflection temperature, 0.45 MPa

125 °C

Show Material materials with Heat deflection temperature, 0.45 MPa of 125 °C

ISO 75-1/-2

Heat deflection temperature, 1.80 MPa

55 °C

Show Material materials with Heat deflection temperature, 1.80 MPa of 55 °C

ISO 75-1/-2

Melting point

225 °C

Show Material materials with Melting point of 225 °C

ISO 11357-1/-3 | 18°F/min

Relative temperature index, electrical

130 °C

Show Material materials with Relative temperature index, electrical of 130 °C

UL 746B | 120mil

Relative temperature index, mechanical impact

130 °C

Show Material materials with Relative temperature index, mechanical impact of 130 °C

UL 746B | 120mil

Relative temperature index, mechanical strength

130 °C

Show Material materials with Relative temperature index, mechanical strength of 130 °C

UL 746B | 120mil

Flammability

Burning Behav. at 60mil nom. thickn.: V-0 class, Thickness tested: 1.5 mm, UL recognition: yes -, Burning Behav. at thickness h: V-0 class, Thickness tested: 0.85 mm, UL recognition: yes -, Oxygen index: 27 %, Glow Wire Flammability Index, 120mil: 960 °C, FMVSS Class: DNI -

Electrical

PropertyTemperatureValueComment

Comparative tracking index

23.0 °C

600 V

Show Material materials with Comparative tracking index of 600 V

IEC 60112

Dielectric constant, 100Hz

23.0 °C

3.5 [-]

Show Material materials with Dielectric constant, 100Hz of 3.5 [-]

IEC 62631-2-1

Dielectric constant, 1MHz

23.0 °C

3.4 [-]

Show Material materials with Dielectric constant, 1MHz of 3.4 [-]

IEC 62631-2-1

Dielectric strength

23.0 °C

36 kV/mm

Show Material materials with Dielectric strength of 36 kV/mm

IEC 60243-1

Dissipation factor, 100Hz

23.0 °C

1.1E-3 [-]

Show Material materials with Dissipation factor, 100Hz of 1.1E-3 [-]

IEC 62631-2-1

Dissipation factor, 1MHz

23.0 °C

0.02 [-]

Show Material materials with Dissipation factor, 1MHz of 0.02 [-]

IEC 62631-2-1

Surface resistivity

23.0 °C

1.00E+14 Ω/sq

Show Material materials with Surface resistivity of 1.00E+14 Ω/sq

IEC 62631-3-2

Volume resistivity

23.0 °C

1.00E+15 Ω·cm

Show Material materials with Volume resistivity of 1.00E+15 Ω·cm

min. | IEC 62631-3-1

Rheological Properties

PropertyTemperatureValueComment

Melt mass-flow rate

3 g/10min

Show Material materials with Melt mass-flow rate of 3 g/10min

ISO 1133 | 250°C/5kg

Shrinkage

23.0 °C

2 %

Show Material materials with Shrinkage of 2 %

ISO 294-4, 2577

Shrinkage, transverse

23.0 °C

1.6 %

Show Material materials with Shrinkage, transverse of 1.6 %

ISO 294-4, 2577

Technological properties

Property
Processing methods

Drying Recommended: yes, Drying Temperature: 120°C, Drying Time, Dehumidified Dryer: 2-4h, Processing Moisture Content: ≤0.04%, Melt Temperature Optimum: 250°C, Min. melt temperature: 240°C, Max. melt temperature: 260°C, Mold Temperature Optimum: 80°C, Min. mold temperature: 30°C, Max. mold temperature: 130°C, Hold pressure range: ≥60MPa, Hold pressure time: 3s/mm, Back pressure: As low as possible, Ejection temperature: 170°C