Zytel® 7301 NC010

Want to keep this datasheet? Save it now in your required format

Description

Zytel® 7301 NC010 is an Unreinforced Polyamide 6

Equivalent Materials

This material data has been provided by Matmatch.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyTemperatureValueComment

Density

23.0 °C

1.13 g/cm³

Show Material materials with Density of 1.13 g/cm³

ISO 1183

Water absorption

23.0 °C

9.5 %

Show Material materials with Water absorption of 9.5 %

Sim. to ISO 62 | 80mil

Mechanical

PropertyTemperatureValueComment

Elastic modulus

23.0 °C

2.9 GPa

Show Material materials with Elastic modulus of 2.9 GPa

ISO 527-1/-2

Elongation

23.0 °C

50 %

Show Material materials with Elongation of 50 %

ISO 527-1/-2 | 50mm/min

Elongation at yield

23.0 °C

4.5 %

Show Material materials with Elongation at yield of 4.5 %

ISO 527-1/-2

Elongation, transverse

23.0 °C

400 %

Show Material materials with Elongation, transverse of 400 %

ISO 527-3 | Film Properties

Flexural modulus

23.0 °C

2.3 GPa

Show Material materials with Flexural modulus of 2.3 GPa

ISO 178

Hardness, Ball Indentation

23.0 °C

170 MPa

Show Material materials with Hardness, Ball Indentation of 170 MPa

ISO 2039-1

Hardness, Rockwell R

23.0 °C

119 [-]

Show Material materials with Hardness, Rockwell R of 119 [-]

ISO 2039-2

Impact strength, Charpy notched

23.0 °C

6 kJ/m²

Show Material materials with Impact strength, Charpy notched of 6 kJ/m²

ISO 179/1eA

Impact strength, Izod unnotched

-40.0 °C

6 kJ/m²

Show Material materials with Impact strength, Izod unnotched of 6 kJ/m²

ISO 180/1A

23.0 °C

6 kJ/m²

Show Material materials with Impact strength, Izod unnotched of 6 kJ/m²

ISO 180/1A

Poisson's ratio

23.0 °C

0.37 [-]

Show Material materials with Poisson's ratio of 0.37 [-]

Tensile strength

23.0 °C

90 MPa

Show Material materials with Tensile strength of 90 MPa

ISO 527-3 | Film Properties

Tensile strength, transverse

23.0 °C

80 MPa

Show Material materials with Tensile strength, transverse of 80 MPa

ISO 527-3 | Film Properties

Yield strength

23.0 °C

80 MPa

Show Material materials with Yield strength of 80 MPa

ISO 527-1/-2

Yield strength, transverse

23.0 °C

31 MPa

Show Material materials with Yield strength, transverse of 31 MPa

ISO 527-3

Impact strength, Charpy unnotched

No Break @ 23,-6,-40°C, ISO 179/1eA

Thermal

PropertyTemperatureValueComment

Coefficient of thermal expansion

23.0 °C

7E-5 1/K

Show Material materials with Coefficient of thermal expansion of 7E-5 1/K

ISO 11359-1/-2

Coefficient of thermal expansion, transverse

23.0 °C

1E-4 1/K

Show Material materials with Coefficient of thermal expansion, transverse of 1E-4 1/K

ISO 11359-1/-2

Heat deflection temperature, 0.45 MPa

160 °C

Show Material materials with Heat deflection temperature, 0.45 MPa of 160 °C

ISO 75-1/-2

Heat deflection temperature, 1.80 MPa

55 °C

Show Material materials with Heat deflection temperature, 1.80 MPa of 55 °C

ISO 75-1/-2

Melting point

221 °C

Show Material materials with Melting point of 221 °C

ISO 11357-1/-3 | 18°F/min

Specific heat capacity

23.0 °C

1680 J/(kg·K)

Show Material materials with Specific heat capacity of 1680 J/(kg·K)

of solid

Thermal conductivity

23.0 °C

0.24 W/(m·K)

Show Material materials with Thermal conductivity of 0.24 W/(m·K)

of solid

Flammability

Glow Wire Flammability Index, 40mil: 800 °C, Glow Wire Flammability Index, 120mil: 850 °C, Glow Wire Ignition Temperature, 30mil: 725 °C, Glow Wire Ignition Temperature, 15mil: 725 °C, Glow Wire Ignition Temperature, 40mil: 725 °C, Glow Wire Ignition Temperature, 60mil: 725 °C, Glow Wire Ignition Temperature, 80mil: 725 °C, Glow Wire Ignition Temperature, 120mil: 725 °C, Glow Wire Temperature, No Flame, 30mil: 700 °C, Glow Wire Temperature, No Flame, 40mil: 700 °C, Glow Wire Temperature, No Flame, 60mil: 700 °C, Glow Wire Temperature, No Flame, 80mil: 700 °C, Glow Wire Temperature, No Flame, 120mil: 700 °C, FMVSS Class: B -, Burning rate, Thickness 1 mm: <80 mm/min

Electrical

PropertyTemperatureValueComment

Comparative tracking index

23.0 °C

600 V

Show Material materials with Comparative tracking index of 600 V

IEC 60112

Dielectric constant, 1MHz

23.0 °C

3.5 [-]

Show Material materials with Dielectric constant, 1MHz of 3.5 [-]

IEC 62631-2-1

Volume resistivity

23.0 °C

1.00E+15 Ω·cm

Show Material materials with Volume resistivity of 1.00E+15 Ω·cm

IEC 62631-3-1

Technological properties

Property
Processing methods

Drying Recommended: yes, Drying Temperature: 80°C, Drying Time, Dehumidified Dryer: 2-4h, Processing Moisture Content: ≤0.2%, Melt Temperature Optimum: 270°C, Min. melt temperature: 260°C, Max. melt temperature: 280°C, Max. screw tangential speed: 0.2m/s, Mold Temperature Optimum: 70°C, Min. mold temperature: 50°C, Max. mold temperature: 90°C, Hold pressure range: 50-100MPa, Hold pressure time: 4s/mm