Minlon® 11C140 BK086

Alternative and trade names
PA66-I-MD40
Want to keep this datasheet? Save it now in your required format

Description

Common features of Minlon® nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness /toughness, good high temperature performance, good chemical resistance, paintability, dimensional stability and low warpage. Grades with improved electrical and flammability properties are available within the Zytel® nylon resin product line. In addition, Minlon® nylon resin is available in different modified and reinforced grades to create a wide range of products with tailored properties for specific processes and end-uses.The good melt stability of Minlon® nylon resin normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-31kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed.Minlon® nylon resin typically is used in demanding applications in the automotive, electrical, electronic, domestic appliances and construction industries.Minlon® 11C140BK086 is a 40% mineral reinforced, heat stabilized polyamide 66 resin for injection molding. It has very low warpage.

Equivalent Materials

This material data has been provided by Matmatch.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyTemperatureValueComment

Density

23.0 °C

1.45 g/cm³

Show Material materials with Density of 1.45 g/cm³

ISO 1183

Water absorption

23.0 °C

5.7 %

Show Material materials with Water absorption of 5.7 %

Sim. to ISO 62 | 80mil

Mechanical

PropertyTemperatureValueComment

Elastic modulus

23.0 °C

5.8 GPa

Show Material materials with Elastic modulus of 5.8 GPa

ISO 527-1/-2

Elongation

23.0 °C

8 %

Show Material materials with Elongation of 8 %

ISO 527-1/-2

Impact strength, Charpy notched

23.0 °C

5.5 kJ/m²

Show Material materials with Impact strength, Charpy notched of 5.5 kJ/m²

ISO 179/1eA

Impact strength, Charpy unnotched

23.0 °C

115 kJ/m²

Show Material materials with Impact strength, Charpy unnotched of 115 kJ/m²

ISO 179/1eU

Impact strength, Izod unnotched

23.0 °C

5 kJ/m²

Show Material materials with Impact strength, Izod unnotched of 5 kJ/m²

ISO 180/1A

Poisson's ratio

23.0 °C

0.35 [-]

Show Material materials with Poisson's ratio of 0.35 [-]

Tensile strength

23.0 °C

87 MPa

Show Material materials with Tensile strength of 87 MPa

ISO 527-1/-2

Thermal

PropertyValueComment

Heat deflection temperature, 1.80 MPa

95 °C

Show Material materials with Heat deflection temperature, 1.80 MPa of 95 °C

ISO 75-1/-2

Melting point

256 °C

Show Material materials with Melting point of 256 °C

ISO 11357-1/-3 | 18°F/min

Relative temperature index, electrical

65 °C

Show Material materials with Relative temperature index, electrical of 65 °C

UL 746B | 120mil

Relative temperature index, mechanical impact

65 °C

Show Material materials with Relative temperature index, mechanical impact of 65 °C

UL 746B | 120mil

Relative temperature index, mechanical strength

65 °C

Show Material materials with Relative temperature index, mechanical strength of 65 °C

UL 746B | 120mil

Flammability

Burning Behav. at 60mil nom. thickn.: HB class, Thickness tested: 1.5 mm, UL recognition: yes -, Burning Behav. at thickness h: HB class, Thickness tested: 0.81 mm, FMVSS Class: B -, Burning rate, Thickness 1 mm: <80 mm/min

Rheological Properties

PropertyTemperatureValueComment

Shrinkage

23.0 °C

1.3 %

Show Material materials with Shrinkage of 1.3 %

ISO 294-4, 2577

Shrinkage, transverse

23.0 °C

1.1 %

Show Material materials with Shrinkage, transverse of 1.1 %

ISO 294-4, 2577

Technological properties

Property
Fillers

40% Mineral Powder

Processing methods

Drying Recommended: yes, Drying Temperature: 80°C, Drying Time, Dehumidified Dryer: 2-4h, Processing Moisture Content: ≤0.2%, Melt Temperature Optimum: 295°C, Min. melt temperature: 285°C, Max. melt temperature: 305°C, Max. screw tangential speed: 0.2m/s, Mold Temperature Optimum: 100°C, Min. mold temperature: 70°C, Max. mold temperature: 120°C, Hold pressure range: 50-100MPa, Hold pressure time: 3s/mm, Ejection temperature: 210°C