Rynite® RE5329 BK503

Alternative and trade names
PET-(GS+GF)36
Want to keep this datasheet? Save it now in your required format

Description

Rynite® RE5329 BK503 is a 36% glass reinforced polyethylene terephthalate resin developed for ignition systems

This material data has been provided by Matmatch.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyTemperatureValueComment

Density

23.0 °C

1.63 g/cm³

Show Material materials with Density of 1.63 g/cm³

ISO 1183

Mechanical

PropertyTemperatureValueComment

Elastic modulus

23.0 °C

11 GPa

Show Material materials with Elastic modulus of 11 GPa

ISO 527-1/-2

Elongation

23.0 °C

2.2 %

Show Material materials with Elongation of 2.2 %

ISO 527-1/-2

Impact strength, Charpy notched

23.0 °C

3.4 kJ/m²

Show Material materials with Impact strength, Charpy notched of 3.4 kJ/m²

ISO 179/1eA

Impact strength, Charpy unnotched

23.0 °C

21 kJ/m²

Show Material materials with Impact strength, Charpy unnotched of 21 kJ/m²

ISO 179/1eU

Poisson's ratio

23.0 °C

0.34 [-]

Show Material materials with Poisson's ratio of 0.34 [-]

Tensile strength

23.0 °C

110 MPa

Show Material materials with Tensile strength of 110 MPa

ISO 527-1/-2

Thermal

PropertyValueComment

Relative temperature index, electrical

75 °C

Show Material materials with Relative temperature index, electrical of 75 °C

UL 746B | 30mil

Relative temperature index, mechanical impact

75 °C

Show Material materials with Relative temperature index, mechanical impact of 75 °C

UL 746B | 30mil

Relative temperature index, mechanical strength

75 °C

Show Material materials with Relative temperature index, mechanical strength of 75 °C

UL 746B | 30mil

Flammability

Burning Behav. at thickness h: HB class, Thickness tested: 0.75 mm, UL recognition: yes -, Glow Wire Flammability Index, 120mil: 960 °C, Glow Wire Ignition Temperature, 120mil: 750 °C, FMVSS Class: B -, Burning rate, Thickness 1 mm: <80 mm/min

Electrical

PropertyTemperatureValueComment

Comparative tracking index

23.0 °C

200 V

Show Material materials with Comparative tracking index of 200 V

IEC 60112

Dielectric constant, 100Hz

23.0 °C

4.3 [-]

Show Material materials with Dielectric constant, 100Hz of 4.3 [-]

IEC 62631-2-1

Dielectric constant, 1MHz

23.0 °C

3.8 [-]

Show Material materials with Dielectric constant, 1MHz of 3.8 [-]

IEC 62631-2-1

Dielectric strength

23.0 °C

36 kV/mm

Show Material materials with Dielectric strength of 36 kV/mm

IEC 60243-1

Dissipation factor, 100Hz

23.0 °C

1.1E-3 [-]

Show Material materials with Dissipation factor, 100Hz of 1.1E-3 [-]

IEC 62631-2-1

Dissipation factor, 1MHz

23.0 °C

0.01 [-]

Show Material materials with Dissipation factor, 1MHz of 0.01 [-]

IEC 62631-2-1

Surface resistivity

23.0 °C

1.00E+14 Ω/sq

Show Material materials with Surface resistivity of 1.00E+14 Ω/sq

IEC 62631-3-2

Volume resistivity

23.0 °C

1.00E+15 Ω·cm

Show Material materials with Volume resistivity of 1.00E+15 Ω·cm

min. | IEC 62631-3-1

Rheological Properties

PropertyTemperatureValueComment

Shrinkage

23.0 °C

0.4 %

Show Material materials with Shrinkage of 0.4 %

ISO 294-4, 2577

Shrinkage, transverse

23.0 °C

0.8 %

Show Material materials with Shrinkage, transverse of 0.8 %

ISO 294-4, 2577

Technological properties

Property
Fillers

36% Glass Fiber and Mineral Powder

Processing methods

Drying Recommended: yes, Drying Temperature: 120°C, Drying Time, Dehumidified Dryer: 4-6h, Processing Moisture Content: ≤0.02%, Melt Temperature Optimum: 285°C, Min. melt temperature: 270°C, Max. melt temperature: 290°C, Max. screw tangential speed: 0.2m/s, Mold Temperature Optimum: 140°C, Min. mold temperature: 120°C, Max. mold temperature: 140°C, Hold pressure range: ≥80MPa, Hold pressure time: 4s/mm, Back pressure: As low as possible, Ejection temperature: 170°C